Nasco® B01348WA Whirl-Pak® Filter Bag for Homogenizer Blender, Polyethylene, Sterile, Dimensions: 6 x 9in (15.2 x 22.9cm), Thickness: 4mil, Capacity: 24oz (710mL)

  • Dimensions (W x L): 6 x 9in (15.2 x 22.9cm); thickness: 4mil; capacity: 24oz (710mL)
  • Made from extra-heavy polyethylene with a strong perimeter seal
  • Contains a third finely perforated PE filter layer sealed into the perimeter of the bag to filter out solids in the sample, allowing the sample to be placed in the bag on either side
  • Sterilized after manufacturing; for use with homogenizer blender
  • Do no use at temperatures above 82°C (180°F); can be frozen to any temperature (careful handling required)
  • Sold Individually
  • Manufacturer Part No: B01348WA
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: NAS-B01348WA
$1,195.86

Sold in: Cases

UnitMSRPYour PriceStock StatusQty
Case1,252.141,195.86Lead Time

New

Details

This 6 x 9in sterile Whirl-Pak® Filter Bag for homogenizer blenders is made from extra-heavy polyethylene with a strong perimeter seal. The bag has a third layer of finely perforated polyethylene that filters out solids in the sample. The hole diameter in the filter layer measures 0.013in (0.33mm), 330 microns, and there are 1,840 holes per square inch, 285 per square cm. The filter layer is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate. Bag should not be used at temperatures above 82°C (180°F). Bag can be frozen to any temperature (careful handling is required after freezing). Sterilized after manufacturing. Material: Extra-Heavy Polyethylene. Hole Diameter: 0.013in (0.33mm); 330 microns. Holes/sq. in: 1840. Holes/sq. cm: 285. Dimensions (W x L): 6 x 9in (15 x 23cm). Thickness: 4mil. Capacity: 24oz (710mL). Nasco® #: B01348WA.

Documents & Videos

This 6 x 9in sterile Whirl-Pak® Filter Bag for homogenizer blenders is made from extra-heavy polyethylene with a strong perimeter seal. The bag has a third layer of finely perforated polyethylene that filters out solids in the sample. The hole diameter in the filter layer measures 0.013in (0.33mm), 330 microns, and there are 1,840 holes per square inch, 285 per square cm. The filter layer is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate. Bag should not be used at temperatures above 82°C (180°F). Bag can be frozen to any temperature (careful handling is required after freezing). Sterilized after manufacturing. Material: Extra-Heavy Polyethylene. Hole Diameter: 0.013in (0.33mm); 330 microns. Holes/sq. in: 1840. Holes/sq. cm: 285. Dimensions (W x L): 6 x 9in (15 x 23cm). Thickness: 4mil. Capacity: 24oz (710mL). Nasco® #: B01348WA.

Ratings & Reviews

No reviews available

Be the first to Write a Review