Control Company 3385 | Variable-Speed Peristaltic Tubing Pump, Low Flow, Flow Rate: 0.03 to 8.20mL/Minute, Dimensions: 6-5/8 4-3/4 4-1/2-Inch

This variable-speed peristaltic tubing pump is compact, with variable-flow, bi-directional, and self-priming, to offer precise flow deliveries. Ideal for use with conductivity flow-thru cells, liquid chromatography, collecting fractions, pH/circulating fluids or buffers in baths, and moving corrosive materials. They provide outstanding flow control and flexibility for transferring and dosing liquids. Fluid contacts only the tubing for contamination-free pumping. The revolution of one roller delivers a precisely measured volume specific to the tubing size and motor speed. May be used with up to 120ft. of tubing for remote sampling. Use with food, pharmaceuticals, and other critical solutions. The tubing may be sterilized by autoclave. Unit pumps liquids and gases. Pumping dry does not harm the pump. Pump has a purge/prime switch for high-speed emptying/filling. It also reverses at the touch of a switch for ease in draining tubing. Three rollers reduce flow pulsation, prevent siphoning, and eliminate the need for check valves. There are no valves to clog, no seals to leak. The 120-VAC CSA-approved wall power supply ensures that a safe 12 volts drive the pump motor. Comes with a battery connector for portable use with any 9 or 12-volt battery. Pump draws so little power it will run for five months on a car battery. Supplied with silicone tubing, and polypropylene fittings/nipples, 115-VAC wall power supply, and an accessory battery connector (battery not supplied). Packaged in a chemical-resistant ABS plastic case. One-year warranty. Size: 6-5/8 x 4-3/4 x 4-1/2-Inch. Low Flow Rate: 0.03 to 8.20mL/minute. Temperature Range of Fluids: -80 to 500°F; -62 to 260°C. Motor: 12 VDC variable. Power: 120 V, 60 Hz; 9 or 12 V battery; or European 220 V, 50 Hz. Weight: 1-1/4 lb. (567g). Control Company #: 3385.

This variable-speed peristaltic tubing pump is compact, with variable-flow, bi-directional, and self-priming, to offer precise flow deliveries. Ideal for use with conductivity flow-thru cells, liquid chromatography, collecting fractions, pH/circulating fluids or buffers in baths, and moving corrosive materials. They provide outstanding flow control and flexibility for transferring and dosing liquids. Fluid contacts only the tubing for contamination-free pumping. The revolution of one roller delivers a precisely measured volume specific to the tubing size and motor speed. May be used with up to 120ft. of tubing for remote sampling. Use with food, pharmaceuticals, and other critical solutions. The tubing may be sterilized by autoclave. Unit pumps liquids and gases. Pumping dry does not harm the pump. Pump has a purge/prime switch for high-speed emptying/filling. It also reverses at the touch of a switch for ease in draining tubing. Three rollers reduce flow pulsation, prevent siphoning, and eliminate the need for check valves. There are no valves to clog, no seals to leak. The 120-VAC CSA-approved wall power supply ensures that a safe 12 volts drive the pump motor. Comes with a battery connector for portable use with any 9 or 12-volt battery. Pump draws so little power it will run for five months on a car battery. Supplied with silicone tubing, and polypropylene fittings/nipples, 115-VAC wall power supply, and an accessory battery connector (battery not supplied). Packaged in a chemical-resistant ABS plastic case. One-year warranty. Size: 6-5/8 x 4-3/4 x 4-1/2-Inch. Low Flow Rate: 0.03 to 8.20mL/minute. Temperature Range of Fluids: -80 to 500°F; -62 to 260°C. Motor: 12 VDC variable. Power: 120 V, 60 Hz; 9 or 12 V battery; or European 220 V, 50 Hz. Weight: 1-1/4 lb. (567g). Control Company #: 3385.