CoorsTek® 60451 230mm Porcelain Desiccator Plate for Crucibles with 8 x 30mm Holes, Flat

CoorsTek Product Availability Notice: Please allow an estimated five to fifteen days lead time for delivery of CoorsTek products. Some products can take slightly longer for delivery.
  • CoorsTek® chemical-porcelain labware desiccator plate. Flat & without Feet
  • Porcelain glazed on the top surface
  • Diameter: 230mm
  • 8 x 30mm Holes
  • Maximum temperature limit for use: 1150°C
  • Sold Individually or 3/Case
  • Manufacturer Part No: 60451
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: CTI-60451
This item is discontinued. Please contact customer service at 512.836.1667 if you would like assistance finding an alternative item.

New

Details

This CoorsTek® chemical-porcelain labware desiccator plate features eight 30mm holes. It is glazed on one side. CoorsTek® porcelain & ceramic labware has excellent thermal-shock resistance. It remains the responsibility of the user to determine the suitability for use. To prevent thermal stress cracks on porcelain ware, CoorsTek® strongly recommends a heating/cooling rate not to exceed 200°C/hour. To prolong the life of your CoorsTek® labware be sure to follow gradual heating and cooling rates. Use an oven or hot plate as an intermediate step when quicker heating/cooling rates are required. Gradually increase flame intensity when using a gas burner. Avoid contact of heated ware with a cold surface. Carefully inspect your ceramic labware prior to each use. Do not use any product that appears defective. Material: Porcelain. Diameter: 230mm. Number of Holes: 8. Diameter Of Holes: 30mm. CoorsTek® #: 60451.

Documents & Videos

This CoorsTek® chemical-porcelain labware desiccator plate features eight 30mm holes. It is glazed on one side. CoorsTek® porcelain & ceramic labware has excellent thermal-shock resistance. It remains the responsibility of the user to determine the suitability for use. To prevent thermal stress cracks on porcelain ware, CoorsTek® strongly recommends a heating/cooling rate not to exceed 200°C/hour. To prolong the life of your CoorsTek® labware be sure to follow gradual heating and cooling rates. Use an oven or hot plate as an intermediate step when quicker heating/cooling rates are required. Gradually increase flame intensity when using a gas burner. Avoid contact of heated ware with a cold surface. Carefully inspect your ceramic labware prior to each use. Do not use any product that appears defective. Material: Porcelain. Diameter: 230mm. Number of Holes: 8. Diameter Of Holes: 30mm. CoorsTek® #: 60451.

Ratings & Reviews

No reviews available

Be the first to Write a Review