Freestanding FlaskScrubber Vantage Series Glassware Washer, Labconco, 230V

Item has been discontinued with no suggested replacement.
  • Manufacturer Part No: 4540031
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: W1200-1B
This item is discontinued. Please contact customer service at 512.836.1667 if you would like assistance finding an alternative item.

New

Details

FlaskScrubber Vantage Series Glassware Washer. Labconco Freestanding FlaskScrubber Vantage Series Laboratory Glassware Washer, with type 304 brushed stainless steel interior and exterior, viewing window and 25 watt interior light, sanitizes glassware with 199°F (93°C) water to sanitize glassware. Features include an LCD for customizing cycles, monitoring water temperature and cycle progress; a water recirculation rate of 112gal/min (424L/min) for thorough cleaning; dual pumps, one for washing and one for draining, to reduce cross contamination potential; built-in deionized water pump to bring non-pressurized or pressurized deionized or purified water into the chamber for up to six pure water rinses; steam generation that produces hot vapor to penetrate and remove dried residue for cleaner glassware; automatic liquid detergent dispenser with peristaltic pump and automatic rinse aid dispenser; ten pre-set cycles including DRY ONLY, RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, INTENSE, INTENSE PLUS, and EXTREME; two user set cycle programs; Alarms with display and one minute audible alert for HOT GLASS (temperature above 122°F/50°C), WATER LOW, WATER HIGH, OVERFLOW, LIQ DETERGENT LEVEL AND RINSE AID LEVEL; Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal; user-set delayed start of up to 8 hours; RS-232 interface for connection to user-supplied computer or printer; HEPA-filtered forced air drying through spindles; spindle rack with 36 detachable large spindles, 18 glassware holders, 36 clips and 10 interchangeable small spindles; accommodates optional upper spindle rack or accommodates optional SteamScrubber Upper and Lower Racks for washing beakers, culture tubes and other specialty glassware. This washer can also convert to undercounter for a more permanent installation. Upper Spindle Rack and SteamScrubber Racks are sold separately. 230V. Dimensions (W x D x H"): 32.2 x 27.5 x 34.2 to 36.2. Labconco #: 4540031.

Documents & Videos

FlaskScrubber Vantage Series Glassware Washer. Labconco Freestanding FlaskScrubber Vantage Series Laboratory Glassware Washer, with type 304 brushed stainless steel interior and exterior, viewing window and 25 watt interior light, sanitizes glassware with 199°F (93°C) water to sanitize glassware. Features include an LCD for customizing cycles, monitoring water temperature and cycle progress; a water recirculation rate of 112gal/min (424L/min) for thorough cleaning; dual pumps, one for washing and one for draining, to reduce cross contamination potential; built-in deionized water pump to bring non-pressurized or pressurized deionized or purified water into the chamber for up to six pure water rinses; steam generation that produces hot vapor to penetrate and remove dried residue for cleaner glassware; automatic liquid detergent dispenser with peristaltic pump and automatic rinse aid dispenser; ten pre-set cycles including DRY ONLY, RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, INTENSE, INTENSE PLUS, and EXTREME; two user set cycle programs; Alarms with display and one minute audible alert for HOT GLASS (temperature above 122°F/50°C), WATER LOW, WATER HIGH, OVERFLOW, LIQ DETERGENT LEVEL AND RINSE AID LEVEL; Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal; user-set delayed start of up to 8 hours; RS-232 interface for connection to user-supplied computer or printer; HEPA-filtered forced air drying through spindles; spindle rack with 36 detachable large spindles, 18 glassware holders, 36 clips and 10 interchangeable small spindles; accommodates optional upper spindle rack or accommodates optional SteamScrubber Upper and Lower Racks for washing beakers, culture tubes and other specialty glassware. This washer can also convert to undercounter for a more permanent installation. Upper Spindle Rack and SteamScrubber Racks are sold separately. 230V. Dimensions (W x D x H"): 32.2 x 27.5 x 34.2 to 36.2. Labconco #: 4540031.

Ratings & Reviews

No reviews available

Be the first to Write a Review