HANNA PRIMO2 Pocket TDS Meter with Automatic Calibration, ATC & Direct Probe Connection, TDS Range: 0 to 1999ppm, Temperature Range: 0.0 to 60.0°C, TDS Resolution: 1ppm, Temperature Resolution: 0.1°C
Item is pending discontinuation. Available quantities may be limited. If your need is critical, please contact customer service to confirm current availability.
- Manufacturer Part No: PRIMO2
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
The Primo TDS meter/tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.Operating and routine maintenance has never been easier. The Primo TDS meter uses a single button at the top of the meter. Press it once and this TDS meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity. Range: 0 to 1999 ppm (mg/L); 0.0 to 60.0°CResolution: 1 ppm (mg/L) / 0.1°CAccuracy: ±2% F.S. Calibration Solution: HI 70032P Calibration: Automatic, at 1382 ppm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 180 x 50 x 25 mm (7.1 x 2.0 x 1.0") Weight: 50 g (1.8 oz.) Primo2 is supplied with batteries and instructions.
Documents & Videos
The Primo TDS meter/tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.Operating and routine maintenance has never been easier. The Primo TDS meter uses a single button at the top of the meter. Press it once and this TDS meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity. Range: 0 to 1999 ppm (mg/L); 0.0 to 60.0°CResolution: 1 ppm (mg/L) / 0.1°CAccuracy: ±2% F.S. Calibration Solution: HI 70032P Calibration: Automatic, at 1382 ppm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 180 x 50 x 25 mm (7.1 x 2.0 x 1.0") Weight: 50 g (1.8 oz.) Primo2 is supplied with batteries and instructions.