• Home
  • HANNA PRIMO4 Pocket Conductivity Meter with Automatic Calibration, ATC & Cable Probe Connection, Ra

HANNA PRIMO4 Pocket Conductivity Meter with Automatic Calibration, ATC & Cable Probe Connection, Range: 0 to 10000 Microsiemens, Resolution: 10 Microsiemens/cm

  • Manufacturer Part No: Primo4
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: W3736H-5
This item is discontinued. Please contact customer service at 512.836.1667 if you would like assistance finding an alternative item.

Details

The Primo4 conductivity meter/tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.Operating and routine maintenance has never been easier. The Primo4 conductivity meter uses a single button at the top of the meter. Press it once and this portable conductivity meter is powered and ready for use. Press and hold the button for a few seconds and Primo4 automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity. Range: 0 to 10.00 mS/cmResolution: 0.01 mS/cmAccuracy: ±2% F.S. Calibration Solution: HI 70039P Calibration: Automatic, at 5.00 mS/cm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter onlyWeight: 115g (1.8 oz.) Primo4 is supplied with batteries and instructions.

Documents & Videos

The Primo4 conductivity meter/tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.Operating and routine maintenance has never been easier. The Primo4 conductivity meter uses a single button at the top of the meter. Press it once and this portable conductivity meter is powered and ready for use. Press and hold the button for a few seconds and Primo4 automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity. Range: 0 to 10.00 mS/cmResolution: 0.01 mS/cmAccuracy: ±2% F.S. Calibration Solution: HI 70039P Calibration: Automatic, at 5.00 mS/cm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter onlyWeight: 115g (1.8 oz.) Primo4 is supplied with batteries and instructions.

Ratings & Reviews

No reviews available

Be the first to Write a Review