IW Tremont TL-0553 Venting & Filtering ThIn-Line Filter with Grade TSS Glass Microfiber Membrane for Suspended Solids, Diam: 50mm, Porosity: 1.5um (Pack of 10)

  • Diameter: 50mm; Porosity: 1.5um; Filtration Area: 20cm2; Stepped Hose Barb Inlet/Outlet: 5 to 15mm (4mm ID)
  • Membrane Filter: Grade TSS Glass Microfiber
  • Very low extractables which can cause background noise in analysis applications.
  • Ideally suited for venting applications and filtration of fluid volumes too large for typical syringe filters
  • In-Line filters can withstand light-duty vacuum pressure (<70cm/Hg) or positive pressure (50psi).
  • Pack of 10
  • Manufacturer Part No: TREM-TL-0553
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: TREM-TL-0553
$72.73

Sold in: Packs

UnitMSRPYour PriceStock StatusQty
Pack82.0072.73Lead Time

New

Details

IW Tremont's venting and filtering ThIn-Line filter units are a unique series of economical and reliable in-line filtration units ideally suited for venting applications and filtration of fluidic volumes too large for syringe filters. The transparent inlet side allows a visual indication of filter loading. These in-line filter units are ultrasonically welded and can withstand light-duty vacuum pressure (<70cm/Hg) or positive pressure (50psi). Each in-line filter is operated with the "clear" side as the inlet and the opaque white side as the outlet. Inline filters are connected using the stepped hose barbs or via a standard slip-port syinge filter inserted in to the clear side step barb.

Applications for Use:
  • Venting of carboys, stir bottles and reservoir tanks
  • Venting of bioreactor low-pressure reactor flasks
  • Vacuum or positive pressure filtration applications
  • Tank to smaller vessel transfers
  • Filtration of media or broth
  • Very low back-pressure with even wetting and linear flow rates



Benefits include:
  • 30% less expensive than typical heavy-duty over-molded designed in-line filters
  • Highly chemical resistant polypropylene housing
  • Very low extractables commonly known to cause background noise within analysis applications
  • Ultrasonically welded with no use of adhesives or solvents
  • Pure virgin 100% polypropylene housing construction without pigments or dye
  • 100% made in the USA and Quality Assurance tested using a 12-point pre- and post-manufactured methodology

Documents & Videos

IW Tremont's venting and filtering ThIn-Line filter units are a unique series of economical and reliable in-line filtration units ideally suited for venting applications and filtration of fluidic volumes too large for syringe filters. The transparent inlet side allows a visual indication of filter loading. These in-line filter units are ultrasonically welded and can withstand light-duty vacuum pressure (<70cm/Hg) or positive pressure (50psi). Each in-line filter is operated with the "clear" side as the inlet and the opaque white side as the outlet. Inline filters are connected using the stepped hose barbs or via a standard slip-port syinge filter inserted in to the clear side step barb.

Applications for Use:
  • Venting of carboys, stir bottles and reservoir tanks
  • Venting of bioreactor low-pressure reactor flasks
  • Vacuum or positive pressure filtration applications
  • Tank to smaller vessel transfers
  • Filtration of media or broth
  • Very low back-pressure with even wetting and linear flow rates



Benefits include:
  • 30% less expensive than typical heavy-duty over-molded designed in-line filters
  • Highly chemical resistant polypropylene housing
  • Very low extractables commonly known to cause background noise within analysis applications
  • Ultrasonically welded with no use of adhesives or solvents
  • Pure virgin 100% polypropylene housing construction without pigments or dye
  • 100% made in the USA and Quality Assurance tested using a 12-point pre- and post-manufactured methodology

Ratings & Reviews

No reviews available

Be the first to Write a Review