MilliporeSigma GWSC10010 Groundwater Sampling Capsule Filter for Metals Analysis with 1µm Polyethersulfone Membrane Filter

  • Disposable, EPA-accepted method for collecting groundwater prior to dissolved metals analysis. Meets requirements for USEPA Method 3005.
  • 1µm filters are designed for water with a normal level particulates
  • Inlet/Outlet: 1/8-Inch NPTM with hose barb adapter for up to 3/8-Inch Tubing; Max Pressure: 4.1 bar/60psi; O.D x Height: 76 x 102mm
  • Filtration Area: 600cm2; Water Flow Rate @ 10psi: 3.8L/Minute (1gpm); Bubble Point @ 23°C: ?690 mbar (Air with Water)
  • Included certificate shows lowest detectable level (LDL) analyses for 67 metals and 2 anions
  • Pack of 10
  • Manufacturer Part No: GWSC10010
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: MIL-GWSC10010
$552.42

Sold in: Packs

UnitMSRPYour PriceStock StatusQty
Pack582.17552.42Lead Time

New

Details

Millipore groundwater sampling capsule filters provide an EPA-accepted method for collecting groundwater prior to dissolved metals analysis. These filtering capsules meet requirements for USEPA Method 3005. A certificate included with each capsule shows lowest detectable level (LDL) analyses for 67 metals and 2 anions. The low-extractables, polyethersulfone membrane filter and housing materials minimize background during sample analysis. 0.45µm capsule filters are designed for relatively clean water with minimal particulates. Capsule filters provide four times more filter area than 142mm disc filters for faster flow rates and higher throughput. Ready to use. No assembly required.

Documents & Videos

Millipore groundwater sampling capsule filters provide an EPA-accepted method for collecting groundwater prior to dissolved metals analysis. These filtering capsules meet requirements for USEPA Method 3005. A certificate included with each capsule shows lowest detectable level (LDL) analyses for 67 metals and 2 anions. The low-extractables, polyethersulfone membrane filter and housing materials minimize background during sample analysis. 0.45µm capsule filters are designed for relatively clean water with minimal particulates. Capsule filters provide four times more filter area than 142mm disc filters for faster flow rates and higher throughput. Ready to use. No assembly required.

Ratings & Reviews

No reviews available

Be the first to Write a Review