MilliporeSigma MPGL20CB3 Millipak®-200 Filter Unit with Durapore® PVDF Membrane & Filling Bell for Lab Water Purification Systems, Pore Size 0.22µm, Non-Sterile (Pack of 3)

  • Hydrophilic Durapore® PVDF membrane with 0.22µm pore size, 1000cm2 Filtration Area. Integral Filling Bell included.
  • Compatible with the following Millipore Lab Water Purification System Models: AFS-10, AFS-10D, AFS-18, AFS-18D, AFS-30, AFS-30D, AFS-25EDI and AFS-50 EDI
  • Millipak disposable filter units are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases
  • Not in-line steam sterilizable, but may be sterilized with 3 autoclave cycles of 90 minutes at 123°C or gamma irradiated
  • Meets USP Oxidizable Substances Test requirements after a water flush of less than 200mL
  • Pack of 3
  • Manufacturer Part No: MPGL20CB3
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: MIL-MPGL20CB3

New

Details

Millipore Millipak disposable filter units are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases. The stacked disc design allows minimal hold-up volume and particle shedding, making Millipak units ideally suited for high value-added applications. All Millipak units are made with Durapore PVDF membranes, providing high flow rates and throughputs, low extractables, broad chemical compatibility and the lowest protein binding of any membrane available. Millipak units are available in 0.1 µm, 0.22 µm and 0.45 µm pore sizes and a variety of inlet and outlet connections. Five different stack sizes allow optimum flexibility for easy scale-up and system sizing. For added convenience, some Millipak units are supplied sterile. Each unit is 100% integrity tested during manufacture to guarantee integrity. For traceability and easy identification, each Millipak filter unit is labeled with its catalogue number, lot number, pore size and serial number. Manufactured from clear, rigid polycarbonate. Membrane Filter: Hydrophilic Durapore® 0.22µm PVDF membrane. Filter Area: 1000cm2 Process Volume: 100-Liters. O.D. x Height: 7.6 x 13cm. Meets USP Oxidizable Substances Test requirements after a water flush of less than 200mL. Filter Material: Hydrophilic Durapore® PVDF. Process Volume: 100L. Pore Size: 0.22µm. Inlet/Outlet Connections: ¼-Inch NPTM. Applications include: Sterile filtration of parenterals, diagnostics & buffers, media & biologicals and Point-of-Use filtration of high purity water dispensed from Millipore Lab Water Purification Systems. Compatible with the following Millipore Lab Water Purification System Models: AFS-10, AFS-10D, AFS-18, AFS-18D, AFS-30, AFS-30D, AFS-25EDI and AFS-50 EDI.

Documents & Videos

Millipore Millipak disposable filter units are stacked disc filters designed for the removal of particles and microorganisms from liquids and gases. The stacked disc design allows minimal hold-up volume and particle shedding, making Millipak units ideally suited for high value-added applications. All Millipak units are made with Durapore PVDF membranes, providing high flow rates and throughputs, low extractables, broad chemical compatibility and the lowest protein binding of any membrane available. Millipak units are available in 0.1 µm, 0.22 µm and 0.45 µm pore sizes and a variety of inlet and outlet connections. Five different stack sizes allow optimum flexibility for easy scale-up and system sizing. For added convenience, some Millipak units are supplied sterile. Each unit is 100% integrity tested during manufacture to guarantee integrity. For traceability and easy identification, each Millipak filter unit is labeled with its catalogue number, lot number, pore size and serial number. Manufactured from clear, rigid polycarbonate. Membrane Filter: Hydrophilic Durapore® 0.22µm PVDF membrane. Filter Area: 1000cm2 Process Volume: 100-Liters. O.D. x Height: 7.6 x 13cm. Meets USP Oxidizable Substances Test requirements after a water flush of less than 200mL. Filter Material: Hydrophilic Durapore® PVDF. Process Volume: 100L. Pore Size: 0.22µm. Inlet/Outlet Connections: ¼-Inch NPTM. Applications include: Sterile filtration of parenterals, diagnostics & buffers, media & biologicals and Point-of-Use filtration of high purity water dispensed from Millipore Lab Water Purification Systems. Compatible with the following Millipore Lab Water Purification System Models: AFS-10, AFS-10D, AFS-18, AFS-18D, AFS-30, AFS-30D, AFS-25EDI and AFS-50 EDI.

Ratings & Reviews

No reviews available

Be the first to Write a Review