Nalgene® 223-0030 Disposable Carboy Venting Filter, Polypropylene with 0.2µm PTFE Membrane (300cm2), Non-Sterile, Thermo Scientific

  • Membrane surface area: 300sq cm; pore size: 0.2µm; liquid flow rate: 80mL/min at 0.1bar; air flow rate: 32L/min at 0.07 bar
  • Material: polypropylene housing with a Teflon® PTFE membrane
  • Used for venting and solvent filtration applications; excellent for maintaining purified water stored in carboys
  • Non-sterile; inlet and outlet: stepped barbed hose fitting from 1/4 to 1/2 inch
  • Permits sterile venting on a slow exhaust/liquid autoclave cycle; each filter may be used up to five times for venting applications
  • Case of 3
  • Manufacturer Part No: NAL-223-0030
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: NAL-223-0030
$438.16

Sold in: Cases

UnitMSRPYour PriceStock StatusQty
Case461.75438.16Lead Time

New

Details

This compact non-sterile carboy vent filter is used for venting and solvent filtration applications and excellent for maintaining purified water stored in carboys. It features a Teflon® PTFE (polytetrafluoroethylene) hydrophobic membrane contained in a polypropylene housing which permits sterile venting on a slow exhaust/liquid autoclave cycle of Nalgene® PP and PC carboys up to 50L. Each filter may be used up to five times for venting applications. Non-sterile. Material: polypropylene housing with a Teflon® PTFE membrane. Membrane surface area: 300sq cm. Pore size: 0.2µm. Liquid flow rate: 80mL/min at 0.1bar. Air flow rate: 32L/min at 0.07 bar. Liquid hold up volume: less than 6mL. Maximum operating pressure: 60psig (4.1bar) at ambient temperature. Maximum operating temperature: 60°C (at 30psig). Inlet and outlet: Stepped barbed hose fitting from 1/4 to 1/2 inch. 3/Case. Nalgene® #: 223-0030.

Documents & Videos

This compact non-sterile carboy vent filter is used for venting and solvent filtration applications and excellent for maintaining purified water stored in carboys. It features a Teflon® PTFE (polytetrafluoroethylene) hydrophobic membrane contained in a polypropylene housing which permits sterile venting on a slow exhaust/liquid autoclave cycle of Nalgene® PP and PC carboys up to 50L. Each filter may be used up to five times for venting applications. Non-sterile. Material: polypropylene housing with a Teflon® PTFE membrane. Membrane surface area: 300sq cm. Pore size: 0.2µm. Liquid flow rate: 80mL/min at 0.1bar. Air flow rate: 32L/min at 0.07 bar. Liquid hold up volume: less than 6mL. Maximum operating pressure: 60psig (4.1bar) at ambient temperature. Maximum operating temperature: 60°C (at 30psig). Inlet and outlet: Stepped barbed hose fitting from 1/4 to 1/2 inch. 3/Case. Nalgene® #: 223-0030.

Ratings & Reviews

No reviews available

Be the first to Write a Review