Oakton® WD-35425-05 PT Testr-35 Waterproof Pocket Multiparameter Tester, Parameters: pH/TDS/Temperature, pH Range: pH 0.0 to 14.0, TDS Range: 0 to 10000ppm, Temperature Dual Range: 0 to 50°C/32 to 122°F
Item is discontinued. The manufacturer’s recommended alternate is item# OAK-WD-35634-35
- Manufacturer Part No: EW-35425-05
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
The Oakton waterproof PCTestr 35 and PTTestr 35 dual parameter testers offer the ability to take two important measurements in one instrument. The Oakton PCTestr 35 measures conductivity and pH - and the Oakton PTTestr 35 measures TDS and pH. Simply press a key to toggle between readings. These waterproof testers float so there is no need to worry about the tester sinking to the bottom of your tank or pond. The Valox housing and stainless steel electrodes offer good chemical compatibility and durability. All waterproof Oakton PCTestr 35 and PTTestr 35 dual parameter testers have replaceable sensors. The meter bodies can be reused multiple times without losing waterproof or dustproof protection. Specifications: Product Type: pH - ORP - & ISE Meters; Units of Measurement: 0.0 to 14.0 pH; 0 to 999 ppm; 1.00 to 10.00 ppt TDS; Resolution: 0.1 pH - 1 ppm - 0.01 ppt; Accuracy: +/- 0.1 pH - +/- 1% full scale TDS; ATC: Yes (32 to 122°F); Operating Modes: pH - TDS; Overall Dimensions: 6-1/2 x 1-1/2 in; Includes: Detachable sensor - clear plastic case - batteries and instructions Oakton #: WD-35425-05
Documents & Videos
The Oakton waterproof PCTestr 35 and PTTestr 35 dual parameter testers offer the ability to take two important measurements in one instrument. The Oakton PCTestr 35 measures conductivity and pH - and the Oakton PTTestr 35 measures TDS and pH. Simply press a key to toggle between readings. These waterproof testers float so there is no need to worry about the tester sinking to the bottom of your tank or pond. The Valox housing and stainless steel electrodes offer good chemical compatibility and durability. All waterproof Oakton PCTestr 35 and PTTestr 35 dual parameter testers have replaceable sensors. The meter bodies can be reused multiple times without losing waterproof or dustproof protection. Specifications: Product Type: pH - ORP - & ISE Meters; Units of Measurement: 0.0 to 14.0 pH; 0 to 999 ppm; 1.00 to 10.00 ppt TDS; Resolution: 0.1 pH - 1 ppm - 0.01 ppt; Accuracy: +/- 0.1 pH - +/- 1% full scale TDS; ATC: Yes (32 to 122°F); Operating Modes: pH - TDS; Overall Dimensions: 6-1/2 x 1-1/2 in; Includes: Detachable sensor - clear plastic case - batteries and instructions Oakton #: WD-35425-05