Digi-Sense WD-35427-20 Temp-10 Portable T-Type Thermocouple Thermometer, Dual Range: -250 to 400°C/-418 to 752°F, Resolution: 0.1°C/0.1°F, Accuracy: 0.1% of Reading
- Freezes measurements for convenient reading and recording
- Push-button adjustment for fine-tuning factory calibration and easy to grip for one-handed operation
- Choose from a wide variety of thermistor probes for fast, easy use
- Displays highest/lowest temperature since meter was switched on, or use Min/Max Hold Mode to continuously update lowest/highest temperature
- Turns off meter after 17 minutes of nonuse to save batteries and protect meter; features a built-in stand
- Manufacturer Part No: EW-35427-20
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
The Digi-Sense Temp 10 thermocouple thermometer is available in 3 different models; J - K or T input. The Temp 10 thermometers use standard miniconnectors - which allow for the use of a wide variety of probes. Push-button operation and ergonomic design provide for fast - easy - one-handed operation. Temperature units can be displayed in °C or °F. The Digi-Sense Temp 10 thermocouple thermometer displays the minimum and maximum temperature since the meter was last switched on. The Min / Max Hold Mode can be used to continuously update lowest and highest temperature readings. The temperature offset calibration adjustment is a push button adjustment for fine-tuning factory calibration. The Digi-Sense Temp 10 thermocouple thermometer has a hold function which freezes measurements for convenient reading and recording. The auto-off function turns the meter off after 17 minutes of non-use to save the batteries. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. The optional rubber armor adds protection and features a built-in stand. Temperature Range: -418 to 752°F (-250 to 400°C) Temperature Resolution: 0.1° between -199.9° and 999.9°; 1° below -199.9° and above 999.9° Temperature Accuracy: Below -238°F (-150°C): +/- 0.25% of reading +/- 2°F (1°C). Above -235°F (-150°C): +/- 0.1% of reading +/- 0.7°F (0.4°C). Temp 10 thermometers features include a large easy-to-read illuminated 4 digit display - an easy-to-use five-button control panel - Min/Max - Hold - °F / °C switchable - auto shutoff - and low battery indicator. Probes: accepts one (1) Thermocouple Probe type T with miniconnector (not included). Includes: AA batteries (3) and instructions. Digi-Sense#: WD-35427-20
Documents & Videos
The Digi-Sense Temp 10 thermocouple thermometer is available in 3 different models; J - K or T input. The Temp 10 thermometers use standard miniconnectors - which allow for the use of a wide variety of probes. Push-button operation and ergonomic design provide for fast - easy - one-handed operation. Temperature units can be displayed in °C or °F. The Digi-Sense Temp 10 thermocouple thermometer displays the minimum and maximum temperature since the meter was last switched on. The Min / Max Hold Mode can be used to continuously update lowest and highest temperature readings. The temperature offset calibration adjustment is a push button adjustment for fine-tuning factory calibration. The Digi-Sense Temp 10 thermocouple thermometer has a hold function which freezes measurements for convenient reading and recording. The auto-off function turns the meter off after 17 minutes of non-use to save the batteries. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. The optional rubber armor adds protection and features a built-in stand. Temperature Range: -418 to 752°F (-250 to 400°C) Temperature Resolution: 0.1° between -199.9° and 999.9°; 1° below -199.9° and above 999.9° Temperature Accuracy: Below -238°F (-150°C): +/- 0.25% of reading +/- 2°F (1°C). Above -235°F (-150°C): +/- 0.1% of reading +/- 0.7°F (0.4°C). Temp 10 thermometers features include a large easy-to-read illuminated 4 digit display - an easy-to-use five-button control panel - Min/Max - Hold - °F / °C switchable - auto shutoff - and low battery indicator. Probes: accepts one (1) Thermocouple Probe type T with miniconnector (not included). Includes: AA batteries (3) and instructions. Digi-Sense#: WD-35427-20