Oakton® WD-35626-20 Acorn™ Temp 6 Portable RTD Thermometer, Dual Range: -200 to 850°C/-320 to 1562°F, Resolution: 0.1C°/0.1°F
- Standard mini-three-pin connector accepts a variety of 100 O Pt 100 probes
- Splash proof keypad and HOLD button freezes measured readings
- Switchable between °C and °F and displays highest/lowest temperature since meter was switched on, or use Min/Max Hold Mode to continuously update lowest/highest temperature
- Nonvolatile memory retains calibration data and stored values even if battery is removed
- Manual user calibration is a single point offset adjustment to any temperature within the range
- Manufacturer Part No: EW-35626-20
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
This thermometer offers high accuracy of RTD technology at an economical price. Positive-action keys with audible clicks are easy to press. MIN/MAX button shows the lowest/highest temperature since the meter was turned on. Hold function freezes measurement reading for viewing. Calibration feature allows user to calibrate meter at almost any location - just place the probe in a bucket of ice water and press the CAL button. The AcornTM Temp 6 RTD meter uses RTD technology to offer a wide measurement range. Use with any two-wire 100 ohm Platinum RTD probe. The large LCD gives you a clear reading at a glance - and warns user of low-battery conditions or calibration errors. Built-in stand and continuous mode operation allow the meter to be sued for bench top use; or use power saver mode to turn meter of after 17 minutes and save on battery life. Other features include low-battery indication - °F/°C selection - and protective rubber boot with stand. Thermometer accepts one 100 ? RTD probe with three-pin connector. This new thermometer offers the convenience and functionality of expensive meters at an economical price. Specifications: Range: -200 to 850°C / -328 to 1562°F. Resolution: 0.1°C / 0.1°F (-99.9 to 199.9°C / -147.8 to 391.8°F); 1.0°C / 1.0°F (199.9°C / 391.8°F). Accuracy: +/- 0.2°C / 0.4°F (-99.9 to 199.9°C / -147.8 to 391.8°F); +/- 2.0°C / 4.0°F (199.9°C / 391.8°F). Input connector: three-pin locking connector. Display: single-line LCD - 7?8' high. Power: 4 1.5 V AA batteries - 200 hours continuous use. Operating Temperature: 0 to 50°C. Probe: one 100 ? platinum RTD with mini-three-pin DIN connector (not included). Dimensions: 5.5' x 2.7' x 1.3' (14 x 7 x 3.5 cm). Weight: 0.9 lb (0.4 kg) Oakton #: WD-35626-20
Documents & Videos
This thermometer offers high accuracy of RTD technology at an economical price. Positive-action keys with audible clicks are easy to press. MIN/MAX button shows the lowest/highest temperature since the meter was turned on. Hold function freezes measurement reading for viewing. Calibration feature allows user to calibrate meter at almost any location - just place the probe in a bucket of ice water and press the CAL button. The AcornTM Temp 6 RTD meter uses RTD technology to offer a wide measurement range. Use with any two-wire 100 ohm Platinum RTD probe. The large LCD gives you a clear reading at a glance - and warns user of low-battery conditions or calibration errors. Built-in stand and continuous mode operation allow the meter to be sued for bench top use; or use power saver mode to turn meter of after 17 minutes and save on battery life. Other features include low-battery indication - °F/°C selection - and protective rubber boot with stand. Thermometer accepts one 100 ? RTD probe with three-pin connector. This new thermometer offers the convenience and functionality of expensive meters at an economical price. Specifications: Range: -200 to 850°C / -328 to 1562°F. Resolution: 0.1°C / 0.1°F (-99.9 to 199.9°C / -147.8 to 391.8°F); 1.0°C / 1.0°F (199.9°C / 391.8°F). Accuracy: +/- 0.2°C / 0.4°F (-99.9 to 199.9°C / -147.8 to 391.8°F); +/- 2.0°C / 4.0°F (199.9°C / 391.8°F). Input connector: three-pin locking connector. Display: single-line LCD - 7?8' high. Power: 4 1.5 V AA batteries - 200 hours continuous use. Operating Temperature: 0 to 50°C. Probe: one 100 ? platinum RTD with mini-three-pin DIN connector (not included). Dimensions: 5.5' x 2.7' x 1.3' (14 x 7 x 3.5 cm). Weight: 0.9 lb (0.4 kg) Oakton #: WD-35626-20