Oakton® WD-35661-11 TDSTestr® Low Portable Waterproof Pocket TDS Meter, Range: 0 to 1990ppm, Resolution: 10ppm, Accuracy: 1% of Scale, Operating Range: 0 to 50°C

  • Waterproof, dustproof housing that floats is certifiable to IP67 standards
  • Replaceable sensor lets you reuse same meter body, saving you money
  • Hold function, Auto-Off
  • Automatic Temperature Compensation
  • Manufacturer Part No: EW-35661-11
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: OAK-WD-35661-11
This item is discontinued. Please contact customer service at 512.836.1667 if you would like assistance finding an alternative item.

Details

Our waterproof microprocessor TDSTestrs and ECTestrs offer push-button calibration and +/- 1% accuracy in a rugged waterproof housing. Never worry about losing your tester in a pond or tank; these testers float! Valox housing and stainless steel electrodes offer good chemical compatibility. Replaceable sensors let you reuse meter body without losing waterproof protection. Measures: TDS or Conductivity; Range: TDSTestr Low: 0 to 1990 ppm; TDSTestr High: 0 to 10.00 ppt; ECTestr Low: 0 to 1990 µS; ECTestr High:0 to 19.90 mS; Resolution: TDSTestr Low: 10 ppm; TDSTestr High: 0.10 ppt; ECTestr Low: 10 µS; ECTestr High:0.10 mS; Accuracy: +/- 1% full-scale; Calibration: One point push button; Waterproof/Dustproof (IP67): Yes; ATC: Yes; Electrode: Replaceable; Operating Temperature: 0 to 50°C (32 to 122°F); Power: Four 1.5 V batteries; Battery life: 140 hours continuous use; Dimensions: 6.5' x 1.5' diameter (16.5 cm x 3.8 cm diameter). Oakton #: WD-35661-11

Documents & Videos

Our waterproof microprocessor TDSTestrs and ECTestrs offer push-button calibration and +/- 1% accuracy in a rugged waterproof housing. Never worry about losing your tester in a pond or tank; these testers float! Valox housing and stainless steel electrodes offer good chemical compatibility. Replaceable sensors let you reuse meter body without losing waterproof protection. Measures: TDS or Conductivity; Range: TDSTestr Low: 0 to 1990 ppm; TDSTestr High: 0 to 10.00 ppt; ECTestr Low: 0 to 1990 µS; ECTestr High:0 to 19.90 mS; Resolution: TDSTestr Low: 10 ppm; TDSTestr High: 0.10 ppt; ECTestr Low: 10 µS; ECTestr High:0.10 mS; Accuracy: +/- 1% full-scale; Calibration: One point push button; Waterproof/Dustproof (IP67): Yes; ATC: Yes; Electrode: Replaceable; Operating Temperature: 0 to 50°C (32 to 122°F); Power: Four 1.5 V batteries; Battery life: 140 hours continuous use; Dimensions: 6.5' x 1.5' diameter (16.5 cm x 3.8 cm diameter). Oakton #: WD-35661-11

Ratings & Reviews

No reviews available

Be the first to Write a Review