Nasco® B01355WA Sludge Judge® II Large Capacity Sampler, Overall Length: 15ft (4.60m), Individual Section Length: 5ft (1.53m), Pipe Diameter: 1-1/4in (3.18cm)
- Overall length: 15ft (4.60m); individual section length: 5ft (1.53m)
- Sludge Judge® II Sampler is made from plastic tubing with a 1-1/4in (3.18cm) outside diameter
- Large diameter doubles the capacity and provides a very rigid unit when assembled
- Designed for sampling 5% or less solids; holds 6oz per foot (178 mL per 0.31m)
- Markers on the tubing at 1ft (0.31m) increments help identify the amount of sludge in the tank
- 50/Pack
- Manufacturer Part No: B01355WA
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
This Sludge Judge® II Sampler is made from plastic tubing with a 1-1/4in (3.18cm) outside diameter, resulting in double the capacity and a very rigid unit when assembled. It is designed for sampling 5% or less solids. The Sludge Judge® II holds 6oz per foot (178 mL per 0.31m) and can be assembled according to the requirements of the job. Add or subtract sections as needed, and the 1ft (0.31m) markers on the tubing will help identify the amount of sludge in the tank. The unit is made up of three 5ft (1.53m) sections (top, extension, and bottom) or individual sections can be combined as required. The Sludge Judge® II is not autoclavable. Do not use for sampling ethanol or ethanol blended fuel. Overall Length: 15ft (4.60m). Individual Section Length: 5ft (1.53m). Pipe Diameter: 1-1/4in (3.18cm). Volume: 6oz/ft (178mL/0.31m). Nasco® #: B01355WA.
Documents & Videos
This Sludge Judge® II Sampler is made from plastic tubing with a 1-1/4in (3.18cm) outside diameter, resulting in double the capacity and a very rigid unit when assembled. It is designed for sampling 5% or less solids. The Sludge Judge® II holds 6oz per foot (178 mL per 0.31m) and can be assembled according to the requirements of the job. Add or subtract sections as needed, and the 1ft (0.31m) markers on the tubing will help identify the amount of sludge in the tank. The unit is made up of three 5ft (1.53m) sections (top, extension, and bottom) or individual sections can be combined as required. The Sludge Judge® II is not autoclavable. Do not use for sampling ethanol or ethanol blended fuel. Overall Length: 15ft (4.60m). Individual Section Length: 5ft (1.53m). Pipe Diameter: 1-1/4in (3.18cm). Volume: 6oz/ft (178mL/0.31m). Nasco® #: B01355WA.