Thermo Scientific® 2896 Precision® 4-Place Concentric Ring Steaming Bath, 7.6-Liter Capacity, Range: Ambient to 100°C, 120V/60Hz

This Thermo Scientific® ELED Precision® concentric ring electrical steaming bath requires 120 V, 9.2A. Bath accommodates various sizes of glassware and evaporating dishes, including round-bottom flasks. Flange-formed stainless-steel rings nest smoothly and become progressively larger as each concentric ring is removed. Copper-clad immersion heaters provide bath temperatures up to 100°C. 4 hole model enlarges from 0.88in (2.2cm) to maximum opening of 5-Inch diameter (12.7cm) . Center ring cover is 1-Inch (2.5cm) dia. Easy to operate with a four-position switch and three different heat settings. Adjustable water level regulator maintains bath depth at the desired level. Stainless-steel cabinets with flanged cabinet top for tabletop installations. Rugged epoxy-coated, corrosion-resistant stand. Accommodates most laboratory glassware. Baths may also be flush-mounted in benchtop. Wiring of switch must be completed onsite. Includes Precision® ring sets, constant water level device (with 0.5in), inlet for water supply, adjustable drain tube, and welded angle-iron support frame with hot-rolled steel legs, fasteners and lockwashers. Hardwire installation by a qualified electrician and hook-up to a continuous water source is required. Operating temperature: 100°C. Minimum opening dia (with cover removed): 0.88in. No. of holes: 4-Hole. Material: Stainless steel. Time to 100°C: 63min. Voltage rating: 120V. Frequency: 50/60Hz. Current rating: 9.2A. Exterior Dimensions, without support (L x W x H): 15 x 15 x 4-Inch. Exterior Dimensions, with support (L x W x H): 15 x 15 x 13in. Heater Settings (low, medium, high): 275W, 550W, 1100W. Minimum Opening Diameter (all rings removed): 5-Inch. Warranty: One Year, Parts and Labor. Thermo Scientific® ELED #: 2896. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Precision® concentric ring electrical steaming bath requires 120 V, 9.2A. Bath accommodates various sizes of glassware and evaporating dishes, including round-bottom flasks. Flange-formed stainless-steel rings nest smoothly and become progressively larger as each concentric ring is removed. Copper-clad immersion heaters provide bath temperatures up to 100°C. 4 hole model enlarges from 0.88in (2.2cm) to maximum opening of 5-Inch diameter (12.7cm) . Center ring cover is 1-Inch (2.5cm) dia. Easy to operate with a four-position switch and three different heat settings. Adjustable water level regulator maintains bath depth at the desired level. Stainless-steel cabinets with flanged cabinet top for tabletop installations. Rugged epoxy-coated, corrosion-resistant stand. Accommodates most laboratory glassware. Baths may also be flush-mounted in benchtop. Wiring of switch must be completed onsite. Includes Precision® ring sets, constant water level device (with 0.5in), inlet for water supply, adjustable drain tube, and welded angle-iron support frame with hot-rolled steel legs, fasteners and lockwashers. Hardwire installation by a qualified electrician and hook-up to a continuous water source is required. Operating temperature: 100°C. Minimum opening dia (with cover removed): 0.88in. No. of holes: 4-Hole. Material: Stainless steel. Time to 100°C: 63min. Voltage rating: 120V. Frequency: 50/60Hz. Current rating: 9.2A. Exterior Dimensions, without support (L x W x H): 15 x 15 x 4-Inch. Exterior Dimensions, with support (L x W x H): 15 x 15 x 13in. Heater Settings (low, medium, high): 275W, 550W, 1100W. Minimum Opening Diameter (all rings removed): 5-Inch. Warranty: One Year, Parts and Labor. Thermo Scientific® ELED #: 2896. Thermo Scientific ELED - “Every Lab, Every Day”.