Thermo Scientific Barnstead Easypure II Type 1 Ultrapure Water Purification System
- Easypure II Type 1 ultrapure water purification system base unit
- Designed for scientists who need up to 15L of ultrapure water per day
- Resistivity at 25°C: 18.2 Mega-ohm/cm; total organic carbon: 5-10ppb; bacteria: less than 1 CFU/mL
- Feed water pressure: 100psig (6.9 bar); inlet water temperature: 40-104°F (4-40°C); voltage: 100-240 VAC; flow rate: up to 1L/hr
- Applications include buffer prep, titration solutions, and AA; produces ultrapure water that exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW
- Sold individually
- Manufacturer Part No: TS-D7381
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
This Thermo Scientific Barnstead Easypure II Type 1 ultrapure water purification system base unit produces ultrapure water that exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2µm final filter at the point of use provides water free of particles and bacteria. It has a whisper quiet pump that provides optimal flow rates and silent operation. A standby mode recirculates purified water during inactivity to ensure purity and allow for on-demand use. All components are constructed of inert materials ensuring maximum ionic and organic purity. The system comes standard with a wall bracket for increased flexibility when choosing a location and a cleaning syringe. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Feed water must be pretreated by reverse osmosis, distillation, or deionization. Designed for scientists who need up to 15L of ultrapure water per day. Applications include buffer prep, titration solutions, and AA. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 5-10ppb. Bacteria: Less Than 1CFU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 17.1 x 19 Inches (30.5 x 43.5 x 48.3cm). Feed Water Pressure: 100psig (6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: Up To 1L/min. Per each. Barnstead #: D7381
Documents & Videos
This Thermo Scientific Barnstead Easypure II Type 1 ultrapure water purification system base unit produces ultrapure water that exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2µm final filter at the point of use provides water free of particles and bacteria. It has a whisper quiet pump that provides optimal flow rates and silent operation. A standby mode recirculates purified water during inactivity to ensure purity and allow for on-demand use. All components are constructed of inert materials ensuring maximum ionic and organic purity. The system comes standard with a wall bracket for increased flexibility when choosing a location and a cleaning syringe. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Feed water must be pretreated by reverse osmosis, distillation, or deionization. Designed for scientists who need up to 15L of ultrapure water per day. Applications include buffer prep, titration solutions, and AA. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 5-10ppb. Bacteria: Less Than 1CFU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 17.1 x 19 Inches (30.5 x 43.5 x 48.3cm). Feed Water Pressure: 100psig (6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: Up To 1L/min. Per each. Barnstead #: D7381