Thermo Scientific Barnstead Easypure II UF Type 1 Ultrapure Water Purification System With Ultrafilter

This Thermo Scientific Barnstead Easypure II UF Type 1 ultrapure water purification system comes with a Ultrafilter to eliminate pyrogens. It produces ultrapure water that exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2µm final filter at the point of use provides water free of particles and bacteria. It has a whisper quiet pump that provides optimal flow rates and silent operation. A standby mode recirculates purified water during inactivity to ensure purity and allow for on-demand use. All components are constructed of inert materials ensuring maximum ionic and organic purity. The system comes standard with an Ultrafilter, a wall bracket for increased flexibility when choosing a location, and a cleaning syringe. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Feed water must be pretreated by reverse osmosis, distillation, or deionization. Designed for scientists who need up to 15L of ultrapure water per day. Applications include cell and tissue culture, monoclonal anti-body production, and electrophoresis. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 5-10ppb. Bacteria: Less Than 1CFU/mL. Pyrogens: Less Than 0.001 EU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 17.1 x 19 Inches (30.5 x 43.5 x 48.3cm). Feed Water Pressure: 100psig (6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: Up To 1L/min. Per each. Barnstead #: D7411

This Thermo Scientific Barnstead Easypure II UF Type 1 ultrapure water purification system comes with a Ultrafilter to eliminate pyrogens. It produces ultrapure water that exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2µm final filter at the point of use provides water free of particles and bacteria. It has a whisper quiet pump that provides optimal flow rates and silent operation. A standby mode recirculates purified water during inactivity to ensure purity and allow for on-demand use. All components are constructed of inert materials ensuring maximum ionic and organic purity. The system comes standard with an Ultrafilter, a wall bracket for increased flexibility when choosing a location, and a cleaning syringe. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Feed water must be pretreated by reverse osmosis, distillation, or deionization. Designed for scientists who need up to 15L of ultrapure water per day. Applications include cell and tissue culture, monoclonal anti-body production, and electrophoresis. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 5-10ppb. Bacteria: Less Than 1CFU/mL. Pyrogens: Less Than 0.001 EU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 17.1 x 19 Inches (30.5 x 43.5 x 48.3cm). Feed Water Pressure: 100psig (6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: Up To 1L/min. Per each. Barnstead #: D7411