Thermo Scientific Barnstead Easypure RoDi Type I Ultrapure Water Purification System With Ventgard Reservoir Cap And UV Lamp

This Thermo Scientific Barnstead Easypure RoDi ultrapure water purification system comes standard with a UV lamp, producing water with ultra low levels of organics. It exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. The Easypure RoDi recirculates water between the reservoir, cartridge, and UV lamp to ensure consistently ultrapure water. A dual wavelength quartz ultraviolet lamp (185 and 254nm) oxidizes organics down to virtually undetectable levels while controlling bacteria within the system. A microprocessor controlled purity monitor provides a digital reading as the water exits the system. The monitoring system alerts you to vital information including membrane performance and when it is time to change the consumables. The 6.5L internal reservoir incorporates an air filter to prevent airborne impurities from contaminating the water during storage. It has a whisper quiet pump that provides optimal flow rates and silent operation. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Designed for scientists needing fewer than 15L of ultrapure water per day. Applications include HPLC, ICP, GC/MS, and AA. Includes a Ventgard reservoir cap and a UV lamp. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 1-5ppb. Bacteria: Less Than 1CFU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 18 x 19 Inches (30.5 x 45.7 x 48.3cm). Feed Water Pressure: 30-100psig (2-6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: 0.8L/min. Per each. Barnstead #: D13321

This Thermo Scientific Barnstead Easypure RoDi ultrapure water purification system comes standard with a UV lamp, producing water with ultra low levels of organics. It exceeds quantitative specifications for Type 1 water as described in ASTM D1193, ISO 3696, and CLSI-CLRW. The Easypure RoDi recirculates water between the reservoir, cartridge, and UV lamp to ensure consistently ultrapure water. A dual wavelength quartz ultraviolet lamp (185 and 254nm) oxidizes organics down to virtually undetectable levels while controlling bacteria within the system. A microprocessor controlled purity monitor provides a digital reading as the water exits the system. The monitoring system alerts you to vital information including membrane performance and when it is time to change the consumables. The 6.5L internal reservoir incorporates an air filter to prevent airborne impurities from contaminating the water during storage. It has a whisper quiet pump that provides optimal flow rates and silent operation. The integral low water and low pressure pump protection ensures pump protection in the event there is not sufficient feed water in the tank. Designed for scientists needing fewer than 15L of ultrapure water per day. Applications include HPLC, ICP, GC/MS, and AA. Includes a Ventgard reservoir cap and a UV lamp. Resistivity at 25°C: 18.2 Mega-ohm-cm. Total Organic Carbon: 1-5ppb. Bacteria: Less Than 1CFU/mL. Daily Output: Up To 15L. Overall Dimensions (W x H x D): 12 x 18 x 19 Inches (30.5 x 45.7 x 48.3cm). Feed Water Pressure: 30-100psig (2-6.9 bar). Inlet Water Temperature: 40-104°F (4-40°C). Voltage: 100-240 VAC. Flow Rate: 0.8L/min. Per each. Barnstead #: D13321