Thermo Scientific® F48020-33 Thermolyne® Benchtop Muffle Furnace with (B1) Digital Single Setpoint Temperature Controller with Ramp & Dwell, Temperature Range: 100° to 1200°C, Capacity: 5.8-Liter/0.2-Cubic Foot, 240V, CE Certified

This item is 240V; please verify this is the correct voltage for your needs.
  • Digital single setpoint control with a single ramp to setpoint and a dwell
  • Single display shows actual temperature or setpoint
  • Requires 240V, 1560W, CE Marked
  • Has a capacity of 5.8L (0.2cu ft)
  • Warranty: 12 months
  • Manufacturer Part No: TS-F48020-33
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: ELED-F48020-33
$5,282.84

Sold in: Eaches

UnitMSRPYour PriceStock StatusQty
Each5,580.005,282.84Lead Time

New

Details

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 5.8L (0.2cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Digital single setpoint control with a single ramp to setpoint and a dwell. Single display shows actual temperature or setpoint. Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 60lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 5.8L (0.2cu ft). Interior Dimensions (D x W x H): 10 x 7 x 5-Inch. Exterior Dimensions (L x W x H): 19.5 x 13.3 x 19in. Control: B1 - Digital Single Setpoint with 1 Ramp. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1560W. Warranty: 12 Months. Certifications: CE Marked. Thermo Scientific® ELED #: F48020-33. Thermo Scientific ELED - “Every Lab, Every Day”.

Documents & Videos

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 5.8L (0.2cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Digital single setpoint control with a single ramp to setpoint and a dwell. Single display shows actual temperature or setpoint. Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 60lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 5.8L (0.2cu ft). Interior Dimensions (D x W x H): 10 x 7 x 5-Inch. Exterior Dimensions (L x W x H): 19.5 x 13.3 x 19in. Control: B1 - Digital Single Setpoint with 1 Ramp. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1560W. Warranty: 12 Months. Certifications: CE Marked. Thermo Scientific® ELED #: F48020-33. Thermo Scientific ELED - “Every Lab, Every Day”.

Ratings & Reviews

No reviews available

Be the first to Write a Review