Thermo Scientific™ FD1530M-33 Thermolyne™ Industrial Benchtop Muffle Furnace, Range: 100° to 1200°C, 240V/50-60Hz
- Single ramp to setpoint and a dwell
- Capacity: 2.2L, Power Consumption: 1560w
- Single display shows actual temperature or setpoint
- Counter-weighted door swings upward, directing heat away from operator
- Includes: Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element
- Sold Individually
- Manufacturer Part No: TS-FD1530M-33
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
Key Features:
- Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat
- Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
- Counter-weighted door swings upward, directing heat away from operator
- Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber
- Door safety switch protects operator by removing power to the heating elements upon opening the door
- Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices
- LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only)
- Dimensions (D x W x H) Interior: 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5cm)
- Dimensions (L x W x H) Exterior: 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9cm)
Single-setpoint Controller (B1):
- Single ramp to setpoint and a dwell
- Single display shows actual temperature or setpoint
Includes:
Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element.
Note:
120V models require fixed wiring and are not supplied with a power cord.
Warranty: 1 year
Documents & Videos
Key Features:
- Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat
- Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
- Counter-weighted door swings upward, directing heat away from operator
- Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber
- Door safety switch protects operator by removing power to the heating elements upon opening the door
- Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices
- LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only)
- Dimensions (D x W x H) Interior: 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5cm)
- Dimensions (L x W x H) Exterior: 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9cm)
Single-setpoint Controller (B1):
- Single ramp to setpoint and a dwell
- Single display shows actual temperature or setpoint
Includes:
Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element.
Note:
120V models require fixed wiring and are not supplied with a power cord.
Warranty: 1 year