Thermo Scientific® VO1218SA Lindberg/Blue M® Vacuum Oven with Digital Microprocessor Control, Over-Temperature Protection & Three Shelves, 42.5-Liter/1.5-Cubic Foot Capacity, Stainless Steel Finish, Temperature Range: Ambient +6° to 260°C, Resolution: 1°C, Vacuum Capacity: 1000microns, 120V/60Hz

  • Corrosion-resistant stainless-steel cabinet with stainless steel finish, includes three aluminum shelves, and has a 42.5L (1.5cu ft) capacity
  • Simultaneous LED display of setpoint and actual temperature with push-button view; resolution to within 1°C
  • Keypad data entry and pull-out control module for easy service
  • Independent overtemperature safety system factory set with reset push-button; maximum temperature of 260°C (500°F)
  • Warranty: 12 months
  • Manufacturer Part No: TS-VO1218SA
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: ELED-VO1218SA
This item is discontinued. Please contact customer service at 512.836.1667 if you would like assistance finding an alternative item.

Details

This Thermo Scientific® ELED Lindberg/Blue M® vacuum oven had a 42.5L (1.5cu ft) capacity, and requires 120V. Designed for drying, curing, outgassing, aging, process control and other applications that require elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres. Has a maximum temperature of 260°C (500°F) with nominal uniformity of ±3.5% of setpoint. Simultaneous LED display of setpoint and actual temperature with push-button view, resolution to within 1°C. Keypad data entry and pull-out control module for easy service. Independent overtemperature safety system factory set with reset push-button. 1-Inch (2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source. With inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port. 1000 microns (1torr) capacity. Vacuum gauge, vacuum, gas and inlet valves located on front. Corrosion-resistant stainless-steel cabinet includes three aluminum shelves with stainless-steel finish. Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source. Low-watt heating element extends oven life. Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door. High-temperature silicone gasket is specially molded for a positive seal. Comes with double door, a solid outer door over inner window, magnetic latch for positive door seal. Viewing windows are 0.5in (1.3cm) thick, and permit observation of work in progress without loss of heat. Caution, ovens are not suitable for use with hazardous vapor. For use with nonflammable, noncorrosive inert gases only. Includes power cord and three aluminum shelves. Shipping Weight: 250lbs. Control: Digital Microprocessor. Vacuum: 1 x 10-2, torr (10microns). Temperature Range: 6 to 260°C. Temperature Resolution: ±1°C. Temperature Uniformity: ±3.5°C. Display: LED. Safety Features: Overtemperature Safety System. Chamber: Corrosion-Resistant Stainless Steel. Ports: Inert Gas Port, Vacuum Port and Vent Port. Capacity: 42.5L (1.5cu ft). Interior Dimensions (D x W x H): 18 x 12 x 12in. Exterior Dimensions (L x W x H): 26 x 21 x 29in. No. of Shelves: 3. Finish: Stainless Steel. Voltage Rating: 120V. Frequency: 50/60Hz. Power Rating: 1250W. Warranty: 12 Months. Certifications: UL Listed. Thermo Scientific® ELED #: VO1218SA. Thermo Scientific ELED - “Every Lab, Every Day”.

Documents & Videos

This Thermo Scientific® ELED Lindberg/Blue M® vacuum oven had a 42.5L (1.5cu ft) capacity, and requires 120V. Designed for drying, curing, outgassing, aging, process control and other applications that require elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres. Has a maximum temperature of 260°C (500°F) with nominal uniformity of ±3.5% of setpoint. Simultaneous LED display of setpoint and actual temperature with push-button view, resolution to within 1°C. Keypad data entry and pull-out control module for easy service. Independent overtemperature safety system factory set with reset push-button. 1-Inch (2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source. With inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port. 1000 microns (1torr) capacity. Vacuum gauge, vacuum, gas and inlet valves located on front. Corrosion-resistant stainless-steel cabinet includes three aluminum shelves with stainless-steel finish. Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source. Low-watt heating element extends oven life. Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door. High-temperature silicone gasket is specially molded for a positive seal. Comes with double door, a solid outer door over inner window, magnetic latch for positive door seal. Viewing windows are 0.5in (1.3cm) thick, and permit observation of work in progress without loss of heat. Caution, ovens are not suitable for use with hazardous vapor. For use with nonflammable, noncorrosive inert gases only. Includes power cord and three aluminum shelves. Shipping Weight: 250lbs. Control: Digital Microprocessor. Vacuum: 1 x 10-2, torr (10microns). Temperature Range: 6 to 260°C. Temperature Resolution: ±1°C. Temperature Uniformity: ±3.5°C. Display: LED. Safety Features: Overtemperature Safety System. Chamber: Corrosion-Resistant Stainless Steel. Ports: Inert Gas Port, Vacuum Port and Vent Port. Capacity: 42.5L (1.5cu ft). Interior Dimensions (D x W x H): 18 x 12 x 12in. Exterior Dimensions (L x W x H): 26 x 21 x 29in. No. of Shelves: 3. Finish: Stainless Steel. Voltage Rating: 120V. Frequency: 50/60Hz. Power Rating: 1250W. Warranty: 12 Months. Certifications: UL Listed. Thermo Scientific® ELED #: VO1218SA. Thermo Scientific ELED - “Every Lab, Every Day”.

Ratings & Reviews

No reviews available

Be the first to Write a Review