Cytiva's Whatman™ 6726-5002 Aqueous IFD™ In-Line Filter/Degasser for HPLC with 0.2µm Nylon Membrane, O-Ring Type, 50mm (Pack of 10)
- Size: 50mm; 0.2µm; nylon membrane
- Provides pure filtration of aqueous based HPLC mobile phases
- Polypropylene housing; o-rings included
- Fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap
- Applications include: HPLC analysis, pharmaceutical research, and analytical chemistry
- Pack of 10
- Manufacturer Part No: WHA-6726-5002
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
This Whatman™ Aqueous IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD™ provides pure filtration of aqueous based HPLC mobile phases. Specifically the Aqueous IFD™ is designed to work with mobile phases containing at least 20% of the aqueous component. The Aqueous IFD™ has a 0.2µm hydrophilic nylon membrane for use with aqueous-based mobile phases. They have a polypropylene housing the circumference of which is sealed by a security ring fittings to accommodate 1/16 inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (O-Rings included.) 10/Pack. Whatman™ # 6726-5002.
Documents & Videos
This Whatman™ Aqueous IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD™ provides pure filtration of aqueous based HPLC mobile phases. Specifically the Aqueous IFD™ is designed to work with mobile phases containing at least 20% of the aqueous component. The Aqueous IFD™ has a 0.2µm hydrophilic nylon membrane for use with aqueous-based mobile phases. They have a polypropylene housing the circumference of which is sealed by a security ring fittings to accommodate 1/16 inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (O-Rings included.) 10/Pack. Whatman™ # 6726-5002.