Cytiva's Whatman™ UN503NPERC Mini-UniPrep™ Syringeless Filter With 0.2µm Regenerated Cellulose Membrane (Pack of 1000)

  • Mini-UniPrep™ syringeless filter with a regenerated cellulose media; all-in-one filtration process allows you to process sample loads in one-third the time
  • Capacity: 0.4mL; pore size: 0.2µm; pack of 1000
  • Sample type: aqueous/organic solvents-low non-specific protein binding media
  • Compatible with most major autosamplers accommodating 12 x 32mm vials
  • Device can be used either manually or with a compressor unit
  • Pack of 1000
  • Manufacturer Part No: WHA-UN503NPERC
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: WHA-UN503NPERC
$3,275.75

Sold in: Packs

UnitMSRPYour PriceStock StatusQty
Pack3,452.153,275.75Lead Time

new

Details

This Mini-UniPrep™ syringeless filter with a regenerated cellulose media provides a faster and easier way to remove particulates from samples being prepared for High Performance Liquid Chromatography (HPLC)/ Ultra High Performance Liquid Chromatography (UHPLC) analysis. The Mini-UniPrep™ is a preassembled filtration device consisting of a 0.4mL capacity chamber and a plunger. The all-in-one filtration process allows you to process sample loads in one-third the time. The plunger contains a filtration membrane at one end and a preattached cap/septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyzer. Capacity: 0.4mL. Pore Size: 0.2µm. Dimensions: Equivalent in size to 12 x 32mm vials. Sample Type: Aqueous/organic solvents-low non-specific protein binding media. Maximum Operating Temperature: 50°C (120°F). Housing And Cap Material: Polypropylene. Septa Material: Polytetrafluoroethylene (PTFE) Coated Silicone Rubber. Compression: Approx. 18lb (8.2kg). Whatman™ #: UN503NPERC.

Documents & Videos

This Mini-UniPrep™ syringeless filter with a regenerated cellulose media provides a faster and easier way to remove particulates from samples being prepared for High Performance Liquid Chromatography (HPLC)/ Ultra High Performance Liquid Chromatography (UHPLC) analysis. The Mini-UniPrep™ is a preassembled filtration device consisting of a 0.4mL capacity chamber and a plunger. The all-in-one filtration process allows you to process sample loads in one-third the time. The plunger contains a filtration membrane at one end and a preattached cap/septum at the other. The plunger is pressed through the sample in the outer chamber and positive pressure forces the filtrate into the reservoir of the plunger. Air escapes through the vent hole until the locking ring is engaged providing an air-tight seal. The device can be used either manually or with a compressor unit. The multi-compressor can process up to 6 samples at one time, further improving sample processing time and reducing the risk of hand stress. The Mini-UniPrep™ device is designed to fit into any autosampler accommodating 12 x 32mm vials. Alternatively the septum can be pierced with a needle and the sample drawn off for manual injection into an analyzer. Capacity: 0.4mL. Pore Size: 0.2µm. Dimensions: Equivalent in size to 12 x 32mm vials. Sample Type: Aqueous/organic solvents-low non-specific protein binding media. Maximum Operating Temperature: 50°C (120°F). Housing And Cap Material: Polypropylene. Septa Material: Polytetrafluoroethylene (PTFE) Coated Silicone Rubber. Compression: Approx. 18lb (8.2kg). Whatman™ #: UN503NPERC.

Ratings & Reviews

No reviews available

Be the first to Write a Review