3M™ 03541 Scotch-Weld™ 1-Pint Epoxy Adhesive 2216 Gray, Part B/A, 6 kits per case
- 2:3 mix ratio simplifies mixing
- High peel and shear strength for strong bonds in critical applications
- 90 minute work time allows for positioning and adjusting for fit prior to setting
- Excellent for creating bonds that can be used at cryogenic temperatures
- Widely used for composite laminate edge sealing
- 6 Kits per Case
- Manufacturer Part No: 3M-00021200203541
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
Our 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is a flexible, two-part, room-temperature curing epoxy adhesive that provides high shear and peel strength, making this an ideal adhesive for the most demanding aerospace applications. It maintains bond strength at low temperatures and stands up to challenging environmental conditions. You can use this high-performance epoxy adhesive to replace mechanical fasteners, screws, rivets and spot welds. 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is excellent for bonding a variety of substrates such a metals and many plastics. It can be dispensed in duo-pak cartridges for use with the 3M™ EPX™ Applicator System for minimal waste and professional results. The mix ratio is 2:3 and the adhesive provides a 90 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 12 hours and is fully cured in 7 days (at 72° F /22° C), but can be accelerated with heat. This epoxy is excellent for creating bonds that can be used at cryogenic temperatures. It’s widely used for composite laminate edge sealing.
Documents & Videos
Our 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is a flexible, two-part, room-temperature curing epoxy adhesive that provides high shear and peel strength, making this an ideal adhesive for the most demanding aerospace applications. It maintains bond strength at low temperatures and stands up to challenging environmental conditions. You can use this high-performance epoxy adhesive to replace mechanical fasteners, screws, rivets and spot welds. 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is excellent for bonding a variety of substrates such a metals and many plastics. It can be dispensed in duo-pak cartridges for use with the 3M™ EPX™ Applicator System for minimal waste and professional results. The mix ratio is 2:3 and the adhesive provides a 90 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 12 hours and is fully cured in 7 days (at 72° F /22° C), but can be accelerated with heat. This epoxy is excellent for creating bonds that can be used at cryogenic temperatures. It’s widely used for composite laminate edge sealing.