Bel-Art 389600000 Vakuwash® Spectrophotmeter Cuvette Washer
- Cuvettes are spray-washed under low pressure and dried by airflow.
- Clean spectrophotmeter cuvette walls allow better light transmission for better reading results
- Cuvette cell washer includes a 500mL polypropylene vacuum flask and vinyl stopper with tubing
- Minimum cuvette I.D must be 9mm or larger to form a seal over the spray nozzle
- Any residual water droplets may be removed with a final rinse with acetone.
- Sold individually
- Manufacturer Part No: BEL-38960-0000
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
To wash a spectrophotometer cell, the opening of a standard cuvette is lightly pressed against the rubber pad, generating suction. The cuvette is sprayed with water or other cleansers added to the funnel, resulting in the cuvette being washed and cleaned. The spent fluid collects in the flask. As long as the cuvette maintains pressure against the cushion, the continued force sets up a stream of air flow into the cuvette and drys it thoroughly. Any residual water droplets may be removed with a final rinse with acetone. Funnel dimensions: 89mm (3.5-Inch) diameter.
Documents & Videos
To wash a spectrophotometer cell, the opening of a standard cuvette is lightly pressed against the rubber pad, generating suction. The cuvette is sprayed with water or other cleansers added to the funnel, resulting in the cuvette being washed and cleaned. The spent fluid collects in the flask. As long as the cuvette maintains pressure against the cushion, the continued force sets up a stream of air flow into the cuvette and drys it thoroughly. Any residual water droplets may be removed with a final rinse with acetone. Funnel dimensions: 89mm (3.5-Inch) diameter.