Bel-Art 420290001 Secador® Techni-Dome® 360 Vacuum Desiccator with Two Gas Ports, Clear Polycarbonate
- Desiccator is ideal for drying oversized or large amounts of moisture-sensitive samples. 360° unobstructed view.
- PP stopcock with PTFE plug smoothly opens and closes for non-turbulent air flow to eliminate disturbance of contents. Stopcock accepts 1/4-Inch I.D. vacuum tubing.
- Strong, shatter-proof desiccator will hold a full vacuum with a rating of 29-Inches Hg (737mm) at room temperature for 24 hours.
- Includes two detachable polypropylene shelves to create two vertical levels of drying and storage capacity. (One 9-Inch and One 14.5-Inch O.D. Plate)
- Safety locator pins in the top and bottom halves prevent displacement when one side is lifted while accessing samples.
- Sold individually
- Manufacturer Part No: BEL-42029-0001
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
The new Secador® Techni-Dome® 360 Vacuum Desiccator with one gas port is the largest domed desiccator in its class. This large volume desiccator is ideal for drying, cooling and degassing humidity-sensitive standards, halide salt cells used in IR spectrophotometers, TLC plates, electronics and other moisture-sensitive items. This unique vacuum desiccator has a 65-Liter capacity (4,000 cubic inches) and holds items up 18-Inches (45cm) tall or wide. Unlike small, dome-shaped vacuum desiccators, the Secador® Techni-Dome® Vacuum Desiccator has space for multiple plates, racks, trays and other laboratory instruments. Contents can be viewed from 360° through the desiccator's transparent polycarbonate top and bottom. This laboratory grade plastic material has smooth and simple-to-clean interior surfaces. The plastic dome construction supplies outstanding chemical and thermal resistance. The lightweight unit weighs 11-Lbs and can be transported by molded-in handles. Top and bottom handles can be bolted with nylon bolts to avoid lateral displacement of the two hemispheres when the unit is not under vacuum and provide convenient locations for tamper-evident seals or locks. A ring is molded into the upper dome so it can be placed inverted on the lab bench when the unit is disassembled. Scienceware® Desiccant in a Cartridge (catalog No. F42045-0250) can be placed under the bottom shelf for drying without vacuum. For operation down to 0ºC, apply a light coating of vacuum grease to the gasket. The polypropylene stopcock features a PTFE plug that can be conveniently rotated to permit a slow, non-turbulent air stream to enter the unit, virtually eliminating any disturbance of contents. The stopcock has a vivid, red handle and accepts 1/4-Inch (6.4mm) I.D. tubing. Optional Accessories Include: • Vacuum Pressure Indicator: BEL-H420420000 • Replacement PTFE Stopcock: BEL-F420400000 • Stackable Incubation Tray: BEL-F189831000 • Scienceware® Natrasorb® TI Desiccant in a Cartridge: D1065-3
Documents & Videos
The new Secador® Techni-Dome® 360 Vacuum Desiccator with one gas port is the largest domed desiccator in its class. This large volume desiccator is ideal for drying, cooling and degassing humidity-sensitive standards, halide salt cells used in IR spectrophotometers, TLC plates, electronics and other moisture-sensitive items. This unique vacuum desiccator has a 65-Liter capacity (4,000 cubic inches) and holds items up 18-Inches (45cm) tall or wide. Unlike small, dome-shaped vacuum desiccators, the Secador® Techni-Dome® Vacuum Desiccator has space for multiple plates, racks, trays and other laboratory instruments. Contents can be viewed from 360° through the desiccator's transparent polycarbonate top and bottom. This laboratory grade plastic material has smooth and simple-to-clean interior surfaces. The plastic dome construction supplies outstanding chemical and thermal resistance. The lightweight unit weighs 11-Lbs and can be transported by molded-in handles. Top and bottom handles can be bolted with nylon bolts to avoid lateral displacement of the two hemispheres when the unit is not under vacuum and provide convenient locations for tamper-evident seals or locks. A ring is molded into the upper dome so it can be placed inverted on the lab bench when the unit is disassembled. Scienceware® Desiccant in a Cartridge (catalog No. F42045-0250) can be placed under the bottom shelf for drying without vacuum. For operation down to 0ºC, apply a light coating of vacuum grease to the gasket. The polypropylene stopcock features a PTFE plug that can be conveniently rotated to permit a slow, non-turbulent air stream to enter the unit, virtually eliminating any disturbance of contents. The stopcock has a vivid, red handle and accepts 1/4-Inch (6.4mm) I.D. tubing. Optional Accessories Include: • Vacuum Pressure Indicator: BEL-H420420000 • Replacement PTFE Stopcock: BEL-F420400000 • Stackable Incubation Tray: BEL-F189831000 • Scienceware® Natrasorb® TI Desiccant in a Cartridge: D1065-3