BrandTech® 737203 PC611 NT Dry Chemistry Multitasking Vacuum System, Ultimate Vacuum: 1.5mbar, Flow Rate: 63lpm, 120V

The 120V US plug PC611 NT dry vacuum system features the new MD4C NT vacuum pump to provide whisper-quiet vacuum with integrated solvent recovery accessories. The CVC3000 vacuum controller and solenoid valve provides up to ten vacuum pumping programs, and different vacuum supply modes with an intuitive graphic interface. It’s an excellent choice for rotary evaporation. A separate flow controlled vacuum port allows the performance of a secondary, less-demanding vacuum application simultaneously. Check valves minimize interference between applications. Free air capacity: 63lpm (2.2cfm. VACUUBRAND® pumps are engineered for performance, with flow rates as much as 40% higher at working vacuum levels than competitive pumps with similar free air capacity ratings. The PC611 NT has an ultimate vacuum of 1.1Torr (1.5mbar) with open gas ballast, for superior performance with condensable vapors. Like all VACUUBRAND® chemistry-design diaphragm vacuum pumps, the MD4C NT vacuum pump in the PC611 NT has flow paths constructed of materials with excellent corrosion resistance, such as PTFE heads and diaphragms. It is also equipped with a gas ballast to provide consistent pump performance with condensed vapors. VACUUBRAND® chemistry-design diaphragm pumps eliminate the misting, handling, and disposal of contaminated oil associated with rotary vane pumps. Typical service intervals are from 10,000-15,000 hours - years in many applications! The flow control and solvent recovery accessories of the PC611 NT are also made of premium, corrosion resistant materials, like borosilicate glass. 120V. Per each. BrandTech® #: 737203.

The 120V US plug PC611 NT dry vacuum system features the new MD4C NT vacuum pump to provide whisper-quiet vacuum with integrated solvent recovery accessories. The CVC3000 vacuum controller and solenoid valve provides up to ten vacuum pumping programs, and different vacuum supply modes with an intuitive graphic interface. It’s an excellent choice for rotary evaporation. A separate flow controlled vacuum port allows the performance of a secondary, less-demanding vacuum application simultaneously. Check valves minimize interference between applications. Free air capacity: 63lpm (2.2cfm. VACUUBRAND® pumps are engineered for performance, with flow rates as much as 40% higher at working vacuum levels than competitive pumps with similar free air capacity ratings. The PC611 NT has an ultimate vacuum of 1.1Torr (1.5mbar) with open gas ballast, for superior performance with condensable vapors. Like all VACUUBRAND® chemistry-design diaphragm vacuum pumps, the MD4C NT vacuum pump in the PC611 NT has flow paths constructed of materials with excellent corrosion resistance, such as PTFE heads and diaphragms. It is also equipped with a gas ballast to provide consistent pump performance with condensed vapors. VACUUBRAND® chemistry-design diaphragm pumps eliminate the misting, handling, and disposal of contaminated oil associated with rotary vane pumps. Typical service intervals are from 10,000-15,000 hours - years in many applications! The flow control and solvent recovery accessories of the PC611 NT are also made of premium, corrosion resistant materials, like borosilicate glass. 120V. Per each. BrandTech® #: 737203.