BriskHeat® ACR-3-MINI ACR® MiniPRO Hot Bonder Kit for Composite Heat Curing without Heating Blankets, Single-Zone, 130/240V
This item is 240V; please verify this is the correct voltage for your needs.
- Single zone universal 100-130VAC ACR® MiniPRO Hot Bonder Kit is lightweight and easy to transport; allows easier and better composite curing with an easy-to-use interface
- Features an 8.4in (213mm) full-color HD touch-screen with quick 3-step programming that uses simple drop-down menus and stores up to 30 programs that can be password protected
- Vacuum system has a vacuum venturi (requires compressed air); data logs digitally
- Accepts Type-J thermocouple connectors with up to 10 thermocouple sensor inputs, giving the user the ability to manually adjust pressure; comes without heaters
- Includes ACR® MiniPRO Hot Bonder, vacuum hose, vacuum bag feed-through, input and heater output power cord, USB flash disk, 10 Type-J thermocouples and adapters for thermocouple receptacles
- Sold individually
- Manufacturer Part No: BRH-ACR-3-MINI
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
This new single zone ACR miniPRO Hot Bonder kit without heaters is small and lightweight, weighing less than 18Lbs (8kg) and is easy to carry and set up. It has an 8.4in (213mm) full-color HD touch-screen that allows easier and better composite curing with an easy-to-use interface. The single vacuum system has a vacuum venturi (requires compressed air). It has 30 amps maximum output using universal voltage of 100-130VAC with a frequency of 50 to 60Hz. It accepts Type-J thermocouple connectors with up to 10 thermocouple sensor inputs. The quick 3-step programming uses simple drop-down menus and stores up to 30 programs that can be password protected. The USB port and USB flash disk allow for instantaneous data transfer and analysis using spreadsheet and word processor programs on PC. It is input ground fault interrupter breaker protected and has audible and visual alarms for high and low temperature/vacuum limits. Data logs digitally and records real-time status of cure including program parameters. It gives the user ability to manually adjust pressure and can cure up to 1400°F (760°C). Intended for use in dry environments (do not expose to spray) at altitude up to 6562ft (2000m). The storage temperature range is -4 to 140°F (-20 to 60°C) with an operating temperature range of 41 to 104°F (5 to 40°C). Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected). This ACR MiniPRO Hot Bonder kit comes without heaters. Kit includes ACR MiniPRO Hot Bonder unit, one 10ft (3m) vacuum hose, one vacuum bag feed-through, one 10ft (3m) input power cord, one 5ft (1.5m) heater output power cord, one USB flash disk, 10 Type-J thermocouples and 10 standard connector adapters for thermocouple receptacles. Touch Screen Size: 8.4in (213mm). Input Voltage: Universal 100 To 130V. Frequency: 50 To 60Hz. Amperage: 20. Output Cord Receptacle: NEMA L14-30R. Pressure: 28in Hg (13.8PSI). Accuracy: ±3°F (1.67°C). Altitude: Up To 6562ft (2000m). Storage Temperature Range: -4 To 140°F (-20 To 60°C). Operating Temperature Range: 41 To 104°F (5 To 40°C). Maximum Relative Humidity: 80% For Temperatures Up To 88°F (31°C) Decreasing Linearly To 50% Relative To Humidity At 104°F (40°C). Number Of Zones: 1. Weight: 18Lbs (8kg). BriskHeat #: ACR-3-MINI.
Documents & Videos
This new single zone ACR miniPRO Hot Bonder kit without heaters is small and lightweight, weighing less than 18Lbs (8kg) and is easy to carry and set up. It has an 8.4in (213mm) full-color HD touch-screen that allows easier and better composite curing with an easy-to-use interface. The single vacuum system has a vacuum venturi (requires compressed air). It has 30 amps maximum output using universal voltage of 100-130VAC with a frequency of 50 to 60Hz. It accepts Type-J thermocouple connectors with up to 10 thermocouple sensor inputs. The quick 3-step programming uses simple drop-down menus and stores up to 30 programs that can be password protected. The USB port and USB flash disk allow for instantaneous data transfer and analysis using spreadsheet and word processor programs on PC. It is input ground fault interrupter breaker protected and has audible and visual alarms for high and low temperature/vacuum limits. Data logs digitally and records real-time status of cure including program parameters. It gives the user ability to manually adjust pressure and can cure up to 1400°F (760°C). Intended for use in dry environments (do not expose to spray) at altitude up to 6562ft (2000m). The storage temperature range is -4 to 140°F (-20 to 60°C) with an operating temperature range of 41 to 104°F (5 to 40°C). Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected). This ACR MiniPRO Hot Bonder kit comes without heaters. Kit includes ACR MiniPRO Hot Bonder unit, one 10ft (3m) vacuum hose, one vacuum bag feed-through, one 10ft (3m) input power cord, one 5ft (1.5m) heater output power cord, one USB flash disk, 10 Type-J thermocouples and 10 standard connector adapters for thermocouple receptacles. Touch Screen Size: 8.4in (213mm). Input Voltage: Universal 100 To 130V. Frequency: 50 To 60Hz. Amperage: 20. Output Cord Receptacle: NEMA L14-30R. Pressure: 28in Hg (13.8PSI). Accuracy: ±3°F (1.67°C). Altitude: Up To 6562ft (2000m). Storage Temperature Range: -4 To 140°F (-20 To 60°C). Operating Temperature Range: 41 To 104°F (5 To 40°C). Maximum Relative Humidity: 80% For Temperatures Up To 88°F (31°C) Decreasing Linearly To 50% Relative To Humidity At 104°F (40°C). Number Of Zones: 1. Weight: 18Lbs (8kg). BriskHeat #: ACR-3-MINI.