BriskHeat® SRV512006X24C SRV Vacuum Silicone Heater Blanket for Composite Heat Curing without Integral Seal, W x L: 9 x 30-Inch, Max Temp: 450°F (232°C), 120V
Item Number:BRH-SRV512006X24C
Manufacturer Part No:SRV512006X24C
Manufacturer:BriskHeat
Units:Sold individually
Details
- BriskHeat® SRV EASYSeal™ vacuum sealing silicone heater blankets are designed for composite curing of vertical, horizontal and complex contoured surfaces without removing the damaged section.
- Blanket W x L: 9 x 30 (229 x 762mm), Heated Area: 6 x 24-Inches (152 x 610mm); Voltage: 120V; Total Watts: 720; Warranty: 2-Years
- Vacuum ports built into blanket eliminate the need for vacuum bagging materials. Sealing tape or conductive putty is required for installation. (EASYSeal™ vacuum sealing edge not included)
- Flexibility: 1/4-Inch Radii. Max Exposure Temperature: 450°F (232°C); Power Density: 5-watts/Square Inch (0.008-watts/Square Meter)
- Requires temperature controller. (Sold Separatey) BriskHeat ACR® 3 or MiniPro™ Hot Bonders recommended.
- Sold individually
Vacuum ports built into this silicone heater blanket eliminates the need for vacuum bagging materials. This 9 x 30-Inch rectangular-shaped BriskHeat® SRV composite heat curing silicone heater blanket has a heating element that is laminated between two layers of 66mil thick non-reinforced silicone rubber with a density of 66oz./Square Yard. Heated area is 6 x 24in (152 x 610mm). The multi-stranded heating element is uniformly placed to maximize heat distribution. It is moisture, chemical and radiation resistant with a smooth surface against repair. Strain relief is built through the entire edge of the blanket for increased durability. Silicone heater blanket is moderately flexible with a bend radius of 1/4-Inch. It has a maximum exposure temperature of 450°F (232°C). The power density is 5watts/sq in (0.008watts/sq m). Furnished complete with a 6-foot power cord with a standard ACR® 3 Hot Bonder compatible plug (NEMA L14-30). Requires temperature controller (sold separately). Two-year warranty. Voltage: 120V. Total Watts: 720. Power Density: 5watts/sq in (0.008watts/sq m). Maximum Exposure Temperature: 450°F (232°C). Dielectric Strength: Over 2000V. Flexibility: 1/4in (6mm) Bend Radius. Shape: Square. Dimensions: 9 x 30in (229 x 762mm). Heated Area: 6 x 24in (152 x 610mm). BriskHeat® #: SRV512006X24C.
Documents & Videos
Vacuum ports built into this silicone heater blanket eliminates the need for vacuum bagging materials. This 9 x 30-Inch rectangular-shaped BriskHeat® SRV composite heat curing silicone heater blanket has a heating element that is laminated between two layers of 66mil thick non-reinforced silicone rubber with a density of 66oz./Square Yard. Heated area is 6 x 24in (152 x 610mm). The multi-stranded heating element is uniformly placed to maximize heat distribution. It is moisture, chemical and radiation resistant with a smooth surface against repair. Strain relief is built through the entire edge of the blanket for increased durability. Silicone heater blanket is moderately flexible with a bend radius of 1/4-Inch. It has a maximum exposure temperature of 450°F (232°C). The power density is 5watts/sq in (0.008watts/sq m). Furnished complete with a 6-foot power cord with a standard ACR® 3 Hot Bonder compatible plug (NEMA L14-30). Requires temperature controller (sold separately). Two-year warranty. Voltage: 120V. Total Watts: 720. Power Density: 5watts/sq in (0.008watts/sq m). Maximum Exposure Temperature: 450°F (232°C). Dielectric Strength: Over 2000V. Flexibility: 1/4in (6mm) Bend Radius. Shape: Square. Dimensions: 9 x 30in (229 x 762mm). Heated Area: 6 x 24in (152 x 610mm). BriskHeat® #: SRV512006X24C.