Control Company 4100 Traceable® Printing Thermometer °F/°C, Temperature Range: -328 to 2431°F; -200 to 1333°C, Cable Length: 48-Inch, Carrying Case Size: 3.5 x 8 x 1-1/4-Inch
Item Number:CON-4100
Manufacturer Part No:4100
Manufacturer:Traceable (Antylia Scientific)
Details
- Traceable® printing thermometer provides permanent record, prints time, date and month
- Range: -328 to 2431°F; -200 to 1333°C; resolution: 0.1°; accuracy: ±1°C
- Automatic printing may be programmed to print in any interval from 3 seconds to 23 hours 59 minutes 59 seconds
- Minimum, maximum, and average temperature memory; alarm; dual probe inputs
- Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls, and ABS carrying case ( 3-1/2 x 8 x 1-1/4in)
This Traceable® printing thermometer provides permanent record, prints time, date and month. Unit prints the time and date for maximum only, minimum only, average only and in circularly mode T1, T2 and differential. Automatic printing may be programmed to print in any interval from 3 seconds to 23 hours 59 minutes 59 seconds. The perfect dependable and reliable unit to monitor temperature in lab, plant, and field. Fulfills federal requirements for CLIA specification 493.1252. Printer provides hard copy for today’s stringent quality-control documentation. Minimum, maximum, and average temperature memories may be displayed or cleared at any time with the touch of a button. Memory feature permits monitoring conditions overnight, on weekends, or for any time period. Alarm may be set in 0.1° increments. Alarm sounds when temperature rises above or falls below set points. Alarm output feature may be used to trigger an external device. Dual probe inputs allow displaying the temperature of probe 1, probe 2, or the difference (delta) of probe 1 and 2. Supplied with two fast-response, type-K beaded sensors with cable length of 4 ft. Thermometer will accept any type-J, K, T or E probes. Display is updated every second. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls (good for approximately 1400 printings per roll), and ABS carrying case. Accessory adaptor for continuous AC operation is available. Tough ABS Plastic case is chemical- and shock-resistant. Range: -328 to 2431°F; -200 to 1333°C. Resolution: 0.1°. Accuracy: ±1°C. Cable Length: 48in. Carrying Case Size: 3-1/2 x 8 x 1-1/4in. Weight: 10 oz. Control Company #: 4100.
Documents & Videos
This Traceable® printing thermometer provides permanent record, prints time, date and month. Unit prints the time and date for maximum only, minimum only, average only and in circularly mode T1, T2 and differential. Automatic printing may be programmed to print in any interval from 3 seconds to 23 hours 59 minutes 59 seconds. The perfect dependable and reliable unit to monitor temperature in lab, plant, and field. Fulfills federal requirements for CLIA specification 493.1252. Printer provides hard copy for today’s stringent quality-control documentation. Minimum, maximum, and average temperature memories may be displayed or cleared at any time with the touch of a button. Memory feature permits monitoring conditions overnight, on weekends, or for any time period. Alarm may be set in 0.1° increments. Alarm sounds when temperature rises above or falls below set points. Alarm output feature may be used to trigger an external device. Dual probe inputs allow displaying the temperature of probe 1, probe 2, or the difference (delta) of probe 1 and 2. Supplied with two fast-response, type-K beaded sensors with cable length of 4 ft. Thermometer will accept any type-J, K, T or E probes. Display is updated every second. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls (good for approximately 1400 printings per roll), and ABS carrying case. Accessory adaptor for continuous AC operation is available. Tough ABS Plastic case is chemical- and shock-resistant. Range: -328 to 2431°F; -200 to 1333°C. Resolution: 0.1°. Accuracy: ±1°C. Cable Length: 48in. Carrying Case Size: 3-1/2 x 8 x 1-1/4in. Weight: 10 oz. Control Company #: 4100.