CoorsTek® 60448 190mm Porcelain Desiccator Plate for Crucibles with 7 x 30mm Holes and Three Feet

CoorsTek Product Availability Notice: Please allow an estimated five to fifteen days lead time for delivery of CoorsTek products. Some products can take slightly longer for delivery.
  • CoorsTek® chemical-porcelain labware desiccator plate has three feet and is 16mm high
  • Porcelain glazed on the top surface
  • Diameter: 190mm
  • 8 x 30mm Holes
  • Maximum temperature limit for use: 1150°C
  • Sold Individually or 4/Case
  • Manufacturer: CoorsTek
  • Manufacturer Part No: 60448
(0) No Reviews yet
Item Number: CTI-60448
$344.48

Sold in: Cases

UnitMSRPYour PriceStock StatusQty
Case390.40344.48Lead Time

Details

This CoorsTek® chemical-porcelain labware desiccator plate has three feet and is 16mm high. It features seven 30mm holes. It is glazed on the top surface. CoorsTek® porcelain & ceramic labware has excellent thermal-shock resistance. It remains the responsibility of the user to determine the suitability for use. To prevent thermal stress cracks on porcelain ware, CoorsTek® strongly recommends a heating/cooling rate not to exceed 200°C/hour. To prolong the life of your CoorsTek® labware be sure to follow gradual heating and cooling rates. Use an oven or hot plate as an intermediate step when quicker heating/cooling rates are required. Gradually increase flame intensity when using a gas burner. Avoid contact of heated ware with a cold surface. Carefully inspect your ceramic labware prior to each use. Do not use any product that appears defective. Material: Porcelain. Diameter: 190mm. Number of Holes: 7. Diameter Of Holes: 30mm. Number Of Feet: 3. Height: 16mm. CoorsTek® #: 60448.

Documents

This CoorsTek® chemical-porcelain labware desiccator plate has three feet and is 16mm high. It features seven 30mm holes. It is glazed on the top surface. CoorsTek® porcelain & ceramic labware has excellent thermal-shock resistance. It remains the responsibility of the user to determine the suitability for use. To prevent thermal stress cracks on porcelain ware, CoorsTek® strongly recommends a heating/cooling rate not to exceed 200°C/hour. To prolong the life of your CoorsTek® labware be sure to follow gradual heating and cooling rates. Use an oven or hot plate as an intermediate step when quicker heating/cooling rates are required. Gradually increase flame intensity when using a gas burner. Avoid contact of heated ware with a cold surface. Carefully inspect your ceramic labware prior to each use. Do not use any product that appears defective. Material: Porcelain. Diameter: 190mm. Number of Holes: 7. Diameter Of Holes: 30mm. Number Of Feet: 3. Height: 16mm. CoorsTek® #: 60448.

Ratings & Reviews

No reviews available

Be the first to Write a Review