HANNA BL983318-1 Mini TDS Controller, Range: 0.0 to 10,000ppm, Resolution: 10ppm, Electrical: 115/230V
This item is 230V; please verify this is the correct voltage for your needs.
- Manufacturer Part No: BL983318-1
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
BL 983318 is a mini Total Dissolved Solids controller that has been designed for easy, affordable installation in tight spaces, ideal for simple yet effective process control. The BL 983318 TDS controller is provided with ATC (Automatic Temperature Compensation) and simple calibration is performed at 1 point through trimmer.The multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. Wiring and external device connections are extremely simple to perform through the terminals on the rear of this TDS controller. You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The overtime control system advises you when the relay is active too long, helping to prevent over-dosage. 115/230 VAC. Hanna #: BL983318-1. Range: 0.0 to 10.00 ppt (0 to 10,000 ppm) Resolution: 0.1 ppt (10 ppm)Accuracy: ±2% F.S. TDS Conversion Factor: 0.5 Probe: HI 7632-00 (not included) Temperature Compensation: Automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C Calibration: Manual, with CAL trimmer Dosing Relay: 1, max 2A (fuse protected), 250 Vac, 30 Vdc (Contact closed when reading exceeds setpoint value)Setpoint: Adjustable from 0 to 10 ppt (10,000 ppm)Overtime: Adjustable, typically from 5 to approx. 30 minutes.Dimensions: 83 x 53 x 99 mm (3.3 x 2.1 x 3.9") Power: 115/230 VAC
Documents & Videos
BL 983318 is a mini Total Dissolved Solids controller that has been designed for easy, affordable installation in tight spaces, ideal for simple yet effective process control. The BL 983318 TDS controller is provided with ATC (Automatic Temperature Compensation) and simple calibration is performed at 1 point through trimmer.The multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. Wiring and external device connections are extremely simple to perform through the terminals on the rear of this TDS controller. You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The overtime control system advises you when the relay is active too long, helping to prevent over-dosage. 115/230 VAC. Hanna #: BL983318-1. Range: 0.0 to 10.00 ppt (0 to 10,000 ppm) Resolution: 0.1 ppt (10 ppm)Accuracy: ±2% F.S. TDS Conversion Factor: 0.5 Probe: HI 7632-00 (not included) Temperature Compensation: Automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C Calibration: Manual, with CAL trimmer Dosing Relay: 1, max 2A (fuse protected), 250 Vac, 30 Vdc (Contact closed when reading exceeds setpoint value)Setpoint: Adjustable from 0 to 10 ppt (10,000 ppm)Overtime: Adjustable, typically from 5 to approx. 30 minutes.Dimensions: 83 x 53 x 99 mm (3.3 x 2.1 x 3.9") Power: 115/230 VAC