HANNA PRIMO1 Pocket TDS Meter with Automatic Calibration, ATC & Cable Probe Connection, Range: 0 to 1999ppm, Resolution: 1ppm
Item is pending discontinuation. Available quantities may be limited. If your need is critical, please contact customer service to confirm current availability.
- Manufacturer Part No: PRIMO1
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
The Primo1 pocket TDS meter/tester has been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, has a one meter (3') cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading. The automatic calibration together with the convenience of the HANNA®' 20 mL sachet solutions make frequent calibration easier and translates to increased accuracy. TDS readings are temperature sensitive and as a result, the probes contain a linearized temperature sensor to compensate for the temperature automatically.Primo 1 measures TDS from 0 to 1999 ppm in increments of 1 ppm. Hanna #: PRIMO1. Range: 0 to 1999 ppm (mg/L) Resolution: 1 ppm (mg/L) Accuracy: ±2% F.S. Calibration Solution: HI 70032P Calibration: Automatic, at 1382 ppm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only Weight: 115 g (1.8 oz.) Primo1 is supplied with batteries and instructions.
Documents & Videos
The Primo1 pocket TDS meter/tester has been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, has a one meter (3') cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading. The automatic calibration together with the convenience of the HANNA®' 20 mL sachet solutions make frequent calibration easier and translates to increased accuracy. TDS readings are temperature sensitive and as a result, the probes contain a linearized temperature sensor to compensate for the temperature automatically.Primo 1 measures TDS from 0 to 1999 ppm in increments of 1 ppm. Hanna #: PRIMO1. Range: 0 to 1999 ppm (mg/L) Resolution: 1 ppm (mg/L) Accuracy: ±2% F.S. Calibration Solution: HI 70032P Calibration: Automatic, at 1382 ppm Temperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only Weight: 115 g (1.8 oz.) Primo1 is supplied with batteries and instructions.