HANNA PRIMO5 Pocket Conductivity Meter with Automatic Calibration, ATC & Direct Probe Connection, Range: 0 to 1999 Microsiemens/cm, Resolution: 1 Microsiemen/cm

The Primo5 pocket conductivity meter/tester has been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, has a one meter (3') cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading. The automatic calibration together with the convenience of the HANNA®' 20 mL sachet solutions make frequent calibration easier and translates to increased accuracy. TDS readings are temperature sensitive and as a result, the probes contain a linearized temperature sensor to compensate for the temperature automatically.Primo 3 measures both conductivity and temperature from 0 to 60.0°C. Hanna #: PRIMO5. Range: µS/cmResolution: 1 µS/cmAccuracy: ±2% F.S. Calibration Solution: HI 70031P Calibration: Automatic, at 1413 µS/cmTemperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 180 x 50 x 25 mm (7.1 x 2.0 x 1.0")Weight: 50 g (1.8 oz.) Primo5 is supplied with batteries and instructions.

The Primo5 pocket conductivity meter/tester has been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/TDS probe, supplied with the Primo series, has a one meter (3') cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions merely to take a reading. The automatic calibration together with the convenience of the HANNA®' 20 mL sachet solutions make frequent calibration easier and translates to increased accuracy. TDS readings are temperature sensitive and as a result, the probes contain a linearized temperature sensor to compensate for the temperature automatically.Primo 3 measures both conductivity and temperature from 0 to 60.0°C. Hanna #: PRIMO5. Range: µS/cmResolution: 1 µS/cmAccuracy: ±2% F.S. Calibration Solution: HI 70031P Calibration: Automatic, at 1413 µS/cmTemperature Compensation: Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life: 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment: 0 to 50°C (32 to 122°F); RH max 95% Dimensions: 180 x 50 x 25 mm (7.1 x 2.0 x 1.0")Weight: 50 g (1.8 oz.) Primo5 is supplied with batteries and instructions.