JT Baker® 9863-02 Methanol, BAKER ANALYZED™ Ultra LC/MS Reagent Grade, 1L Glass Bottle (Case of 6)
- Case of 6 x 1L Glass Bottles
- Manufacturer Part No: JT-9863-02
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
Product Specifications
TEST | SPECIFICATION |
For Laboratory,Research,or Manufacturing Use | |
Appearance | Passes Test |
Gradient Elution Test (a.u.) - 254 nm | <= 0.01 |
Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission | <= 0.3 ppb |
Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities | <= 1.0 ppb |
Assay (CH₃OH) | >= 99.9 % |
Color (APHA) | <= 10 |
Residue after Evaporation | <= 1.0 ppm |
Water (H₂O) | <= 500 ppm |
LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine) | <= 25.0 ppb |
LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol) | <= 25.0 ppb |
Trace Impurities - Aluminum (Al) | <= 10.0 ppb |
Trace Impurities - Calcium (Ca) | <= 20.0 ppb |
Trace Impurities - Chromium (Cr) | <= 5.0 ppb |
Trace Impurities - Cobalt (Co) | <= 5.0 ppb |
Trace Impurities - Copper (Cu) | <= 5.0 ppb |
Trace Impurities - Iron (Fe) | <= 5.0 ppb |
Trace Impurities - Lead (Pb) | <= 5.0 ppb |
Trace Impurities - Lithium (Li) | <= 10.0 ppb |
Trace Impurities - Magnesium (Mg) | <= 10.0 ppb |
Trace Impurities - Manganese (Mn) | <= 5.0 ppb |
Trace Impurities - Nickel (Ni) | <= 5.0 ppb |
Trace Impurities - Potassium (K) | <= 10.0 ppb |
Trace Impurities - Sodium (Na) | <= 50.0 ppb |
Trace Impurities - Tin (Sn) | <= 5.0 ppb |
Trace Impurities - Zinc (Zn) | <= 10.0 ppb |
Filtered through a 0.1 micron filter. |
Documents & Videos
Product Specifications
TEST | SPECIFICATION |
For Laboratory,Research,or Manufacturing Use | |
Appearance | Passes Test |
Gradient Elution Test (a.u.) - 254 nm | <= 0.01 |
Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission | <= 0.3 ppb |
Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities | <= 1.0 ppb |
Assay (CH₃OH) | >= 99.9 % |
Color (APHA) | <= 10 |
Residue after Evaporation | <= 1.0 ppm |
Water (H₂O) | <= 500 ppm |
LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine) | <= 25.0 ppb |
LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol) | <= 25.0 ppb |
Trace Impurities - Aluminum (Al) | <= 10.0 ppb |
Trace Impurities - Calcium (Ca) | <= 20.0 ppb |
Trace Impurities - Chromium (Cr) | <= 5.0 ppb |
Trace Impurities - Cobalt (Co) | <= 5.0 ppb |
Trace Impurities - Copper (Cu) | <= 5.0 ppb |
Trace Impurities - Iron (Fe) | <= 5.0 ppb |
Trace Impurities - Lead (Pb) | <= 5.0 ppb |
Trace Impurities - Lithium (Li) | <= 10.0 ppb |
Trace Impurities - Magnesium (Mg) | <= 10.0 ppb |
Trace Impurities - Manganese (Mn) | <= 5.0 ppb |
Trace Impurities - Nickel (Ni) | <= 5.0 ppb |
Trace Impurities - Potassium (K) | <= 10.0 ppb |
Trace Impurities - Sodium (Na) | <= 50.0 ppb |
Trace Impurities - Tin (Sn) | <= 5.0 ppb |
Trace Impurities - Zinc (Zn) | <= 10.0 ppb |
Filtered through a 0.1 micron filter. |