Nalgene® 11102-0030 Cylindrical Graduated Heavy-Duty Tank with Cover and Spigot, LLDPE, 30 Gallon (114L), Thermo Scientific

  • Capacity: 30 gallons (113L); dimensions (O.D. x D): 18 inch x 30 inch (46cm x 76cm); wall thickness: 3/16 inch (4.7mm)
  • Material: LLDPE (linear low-density polyethylene) tank and floating cover; PP spigot with two Teflon® O-rings
  • Graduated in gallons and liters every 2.5 gallons (10L); non-sterile; not autoclavable
  • Rigid surface; good temperature resistance; supplied with floating cover; spigot accepts 5/8 inch (1.3cm) I.D. tubing
  • Meets USP Class VI requirements and complies with 21CFR177.1520
  • Sold Individually
  • Manufacturer Part No: NAL-11102-0030
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: T1065-4
$495.56

Sold in: Cases

UnitMSRPYour PriceStock StatusQty
Case530.00495.56Lead Time

New

Details

This 30 gallon (113L) LLDPE cylindrical heavy duty tank is non-sterile and not autoclavable. Graduated in both gallons and liters the tank is rigid with a hard surface and good temperature resistance. It meets USP Class VI requirements and complies with 21CFR177.1520. It is supplied with a floating cover and a factory-installed needle-type polypropylene spigot with two Teflon O-rings for draw off using 5/8 inch (1.3cm) I.D. tubing. CAUTION! Plastic tanks are generally subject to more severe conditions than plastic labware; exposure is constant stresses are greater and different classes and concentrations of chemicals are involved. Please pay special attention to chemical compatibility. Material: LLDPE tank and PP spigot with two Teflon O-rings. Capacity: 30 gallons (113L). Graduations: every 2.5 gallons (10L). Dimensions (O.D. x D): 18 inch x 30 inch (46m x 76cm). Wall thickness: 3/16 inch (4.7mm). Sold individually. Nalgene #: 11102-0030.

Documents & Videos

This 30 gallon (113L) LLDPE cylindrical heavy duty tank is non-sterile and not autoclavable. Graduated in both gallons and liters the tank is rigid with a hard surface and good temperature resistance. It meets USP Class VI requirements and complies with 21CFR177.1520. It is supplied with a floating cover and a factory-installed needle-type polypropylene spigot with two Teflon O-rings for draw off using 5/8 inch (1.3cm) I.D. tubing. CAUTION! Plastic tanks are generally subject to more severe conditions than plastic labware; exposure is constant stresses are greater and different classes and concentrations of chemicals are involved. Please pay special attention to chemical compatibility. Material: LLDPE tank and PP spigot with two Teflon O-rings. Capacity: 30 gallons (113L). Graduations: every 2.5 gallons (10L). Dimensions (O.D. x D): 18 inch x 30 inch (46m x 76cm). Wall thickness: 3/16 inch (4.7mm). Sold individually. Nalgene #: 11102-0030.

Ratings & Reviews

No reviews available

Be the first to Write a Review