Thermo Scientific™ 50145516 Heracell™ VIOS 160i CO2 Incubator with Dual 100% Solid Copper Inner Chamber, HEPA Filtration, Range: Ambient +3° to 55°C, 120V/50-60Hz

  • Auto-stop function disables fan operation during door openings to minimize air exchange
  • CO2 Sensor Technology: IR180Si Sensor, CO2 Concentration Range: 1 to 20%
  • Relative Humidity: ≥93% at 37°C
  • Capacity: 165L Per Chamber
  • In-chamber HEPA continuously filters the entire chamber air volume every 60 seconds
  • Sold individually
  • Manufacturer Part No: TS-50145516
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: ELED-50145516
$30,166.60

Sold in: Eaches

UnitMSRPYour PriceStock StatusQty
Each31,790.9930,166.60Lead Time

New

Details

Protect valuable samples while optimizing cell growth. Thermo Scientific™ Heracell™ 150i CO2 Incubators with Stainless-Steel Chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.

Direct heat chamber

  1. 150L (5.3 cu. ft.) electropolished stainless steel chamber with compact footprint, easily stackable
  2. Standard left hand door swing, field reversible by qualified service support
  3. Minimal, easy-to-clean assembly with smooth inner chamber and rounded corners for easy cleaning
  4. In-chamber fan gently distributes conditioned, humidified air throughout the chamber ensuring homogeneous conditions


In situ sensors and probes designed for precise monitoring

  1. Choice of TC (thermal conductivity) CO2 sensor for long, reliable operation or IR (infrared) CO2 sensor for monitoring when humidity and temperature are less predictable
  2. Dual temperature probes with over temperature protection


Rapid response humidity reservoir

  1. Directly heated water reservoir designed to provide stable, high relative humidity, preventing culture desiccation
  2. Pan-less system provides recovery rates up to 5X faster than traditional water pans
  3. Water level sensor indicates when a refill is needed


ContraCon 90°C moist heat disinfection cycle

  1. On-demand cycle simplifies cleaning and eliminates the need to separately autoclave components
  2. Operation is push-button simple and does not require removal of sensors or other components
  3. Independently validated to eliminate a wide range contaminants including bacteria, molds, fungal spores, and mycoplasmas


Intuitive, interactive iCAN touchscreen control

  1. Bright LED screen allows monitoring of all incubator interactions
  2. Provides visibility to changes in culture environment with performance trend graphing, error and usage logs
  3. Convenient on-screen user prompts and reminders for easy navigation
  4. Selectable languages simplify operation: English, Spanish, German, French, and Italian

Wireless Monitoring Solution

Thermo Scientific™ DeviceLink HUB™, our easy-to-install solution, works with the Thermo Fisher Cloud to monitor conditions inside your CO2 incubators.

  1. DeviceLink HUB monitors chamber temperature, gas levels, alarms, and alerts from the incubator data output connection, RS-232 or USB
  2. Alarms and notifications are also sent to the user by email and mobile push notification
  3. DeviceLink HUB is an optional accessory for models with the iCAN touchscreen interface
  4. DeviceLink HUB is available in the following regions
    1. United States and Canada
    2. 28 members of the European Union
    3. Iceland, Liechtenstein, Norway, and Switzerland

Documents & Videos

Protect valuable samples while optimizing cell growth. Thermo Scientific™ Heracell™ 150i CO2 Incubators with Stainless-Steel Chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.

Direct heat chamber

  1. 150L (5.3 cu. ft.) electropolished stainless steel chamber with compact footprint, easily stackable
  2. Standard left hand door swing, field reversible by qualified service support
  3. Minimal, easy-to-clean assembly with smooth inner chamber and rounded corners for easy cleaning
  4. In-chamber fan gently distributes conditioned, humidified air throughout the chamber ensuring homogeneous conditions


In situ sensors and probes designed for precise monitoring

  1. Choice of TC (thermal conductivity) CO2 sensor for long, reliable operation or IR (infrared) CO2 sensor for monitoring when humidity and temperature are less predictable
  2. Dual temperature probes with over temperature protection


Rapid response humidity reservoir

  1. Directly heated water reservoir designed to provide stable, high relative humidity, preventing culture desiccation
  2. Pan-less system provides recovery rates up to 5X faster than traditional water pans
  3. Water level sensor indicates when a refill is needed


ContraCon 90°C moist heat disinfection cycle

  1. On-demand cycle simplifies cleaning and eliminates the need to separately autoclave components
  2. Operation is push-button simple and does not require removal of sensors or other components
  3. Independently validated to eliminate a wide range contaminants including bacteria, molds, fungal spores, and mycoplasmas


Intuitive, interactive iCAN touchscreen control

  1. Bright LED screen allows monitoring of all incubator interactions
  2. Provides visibility to changes in culture environment with performance trend graphing, error and usage logs
  3. Convenient on-screen user prompts and reminders for easy navigation
  4. Selectable languages simplify operation: English, Spanish, German, French, and Italian

Wireless Monitoring Solution

Thermo Scientific™ DeviceLink HUB™, our easy-to-install solution, works with the Thermo Fisher Cloud to monitor conditions inside your CO2 incubators.

  1. DeviceLink HUB monitors chamber temperature, gas levels, alarms, and alerts from the incubator data output connection, RS-232 or USB
  2. Alarms and notifications are also sent to the user by email and mobile push notification
  3. DeviceLink HUB is an optional accessory for models with the iCAN touchscreen interface
  4. DeviceLink HUB is available in the following regions
    1. United States and Canada
    2. 28 members of the European Union
    3. Iceland, Liechtenstein, Norway, and Switzerland

Ratings & Reviews

No reviews available

Be the first to Write a Review