Thermo Scientific® F47920-33 Thermolyne® Benchtop Muffle Furnace with (B1) Digital Single Setpoint Temperature Controller with Ramp & Dwell, Temperature Range: 100° to 1200°C, Capacity: 2-Liter/0.07-Cubic Foot, 240V, CE Certified

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 2L (0.07cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Controller has digital single setpoint control with a single ramp to setpoint and a dwell. Single display shows actual temperature or setpoint Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 41lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 2L (0.07cu ft). Interior Dimensions (D x W x H): 6 x 5 x 4-Inch. Exterior Dimensions (L x W x H): 15.5 x 11.3 x 18.5in. Control: Control: B1 - digital single setpoint with 1 ramp. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1000W. Warranty: 12 Months. Certifications: CE Certified. Thermo Scientific® ELED #: F47920-33. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 2L (0.07cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Controller has digital single setpoint control with a single ramp to setpoint and a dwell. Single display shows actual temperature or setpoint Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 41lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 2L (0.07cu ft). Interior Dimensions (D x W x H): 6 x 5 x 4-Inch. Exterior Dimensions (L x W x H): 15.5 x 11.3 x 18.5in. Control: Control: B1 - digital single setpoint with 1 ramp. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1000W. Warranty: 12 Months. Certifications: CE Certified. Thermo Scientific® ELED #: F47920-33. Thermo Scientific ELED - “Every Lab, Every Day”.