Thermo Scientific® F48020-33-80 Thermolyne® Benchtop Muffle Furnace with (C1) Digital Programmable Temperature Controller (1-Program & 8-Segments), Temperature Range: 100° to 1200°C, Capacity: 5.8-Liter/0.2-Cubic Foot, 240V, CE Certified

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 5.8L(0.2cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Digital programmable control with one stored program of eight segments. Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 60lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 5.8L(0.2cu ft). Interior Dimensions (D x W x H): 10 x 7 x 5-Inch. Exterior Dimensions (L x W x H): 19.5 x 13.3 x 19in. Control: C1 - programmable with 1 program, 8 segments. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1000W. Warranty: 12 Months. Certifications: CE Marked. Thermo Scientific® ELED #: F48020-33-80. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Thermolyne benchtop muffle furnace has a capacity of 5.8L(0.2cu ft), requires 240V, and is for use with general laboratory, including gravimetric analysis, sintering, quantitative analysis and heat treating. Reaches a 1200°C maximum temperature. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Digital programmable control with one stored program of eight segments. Furnaces with this control also use a mechanical overtemperature protection relay. For added protection, the door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition. Two open coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient. Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord. Shipping Weight: 60lbs. Temperature Range: 100 to 1200°C (212 to 2192°F). Display: Digital, actual or setpoint. Capacity: 5.8L(0.2cu ft). Interior Dimensions (D x W x H): 10 x 7 x 5-Inch. Exterior Dimensions (L x W x H): 19.5 x 13.3 x 19in. Control: C1 - programmable with 1 program, 8 segments. Voltage Rating: 240V. Frequency: 50/60Hz. Power Rating: 1000W. Warranty: 12 Months. Certifications: CE Marked. Thermo Scientific® ELED #: F48020-33-80. Thermo Scientific ELED - “Every Lab, Every Day”.