This UV PCR workstation controls potential PCR contamination with built-in UV lamps for inactivation of DNA between experiments. Shortwave UV source positioned as overhead UV. UV is controlled with a key switch and 30 min timer to decontaminate apparatus and chamber with the shortwave UV. Shortwave ultraviolet irradiation can be used as a standard laboratory practice to reduce surface and airborne contaminants in the chamber. A safety shut-off switch automatically turns the ultraviolet light off when the door is open. Antimicrobial coated stainless steel reduces bacterial growth, stain- and fingerprint-resistant as well. Built-in power outlets allow operation of equipment for use in PCR applications. Designed for PCR preparation and amplification, microbial research. Designed for placement of large instruments on the work area or tubes, flasks and pipettes on the two removable shelves. Operational ratings - unit intended to be used indoors, altitude must not exceed 2000m, ambient temperature not to exceed 5 to 40°C (41 to 104°F), relative humidity not to exceed 80% for temperatures upto 31°C (88°F) decreasing linearly to 50% relative humidity at 40°C (104°F), main supply voltage fluctuations upto ±10% of the nominal voltage, pollution rating 2 or better for laboratory areas. Products come flat-packed for customer assembly. 28.7 H x 29 W x 24in D Exterior. 27.8 W x 21.4in D Interior. 254nm Shortwave 25-watt UV and 15w White (Chamber) Light Source. 115V. 8.8A. UVP® #: 95-0367-01.