Cytiva's Whatman™ 6725-5002A Solvent IFD™ In-Line Filter/Degasser for HPLC with 0.2µm Polypropylene Membrane, Tubing Type, 50mm (Pack of 10)
- Size: 50mm; 0.2µm; polypropylene membrane
- Provides pure filtration of aqueous based HPLC mobile phases
- Polypropylene housing; accepts tubing only
- Fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap
- Applications include: HPLC analysis, pharmaceutical research, and analytical chemistry
- Pack of 10
- Manufacturer Part No: WHA-6725-5002A
PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.
Details
Whatman™ brand Solvent IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Solvent IFD™ provides pure filtration of organically based HPLC mobile phases. It has a 0.2µm high-flow polypropylene membrane for mobile phases containing organic solvents. The housing is polypropylene the circumference of which is sealed by a security ring fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (Non O-Ring style - tubing only) 10/Pack. Whatman™ # 6725-5002A.
Documents & Videos
Whatman™ brand Solvent IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Solvent IFD™ provides pure filtration of organically based HPLC mobile phases. It has a 0.2µm high-flow polypropylene membrane for mobile phases containing organic solvents. The housing is polypropylene the circumference of which is sealed by a security ring fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (Non O-Ring style - tubing only) 10/Pack. Whatman™ # 6725-5002A.