Cytiva's Whatman™ UN513UORG UniPrep™ Syringeless Filter with 0.45µm PTFE Membrane (Pack of 1000)

  • Prefilter: Built-In Glass Microfiber; Membrane: PTFE; Sample Volume Capacity: 1 - 5mL; Retention (Pore Size): 0.45µm
  • Preassembled filtration device for the filtration and storage of laboratory samples
  • Consists of two parts; test tube and filter-plunger
  • Does not contain a septum in the cap and can be used to filter larger volumes (1 to 5mL)
  • Choice of membranes for wide sample compatibility
  • Pack of 1000
  • Manufacturer Part No: WHA-UN513UORG
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: WHA-UN513UORG
$5,044.55

Sold in: Packs

UnitMSRPYour PriceStock StatusQty
Pack5,549.005,044.55Lead Time

New

Details

The UniPrep™ syringeless filter is a preassembled filtration device for the filtration and storage of laboratory samples. It features a plunger filter and vial in one unit and replaces the syringe-coupled filtration devices with single disposable units. The UniPrep™ device consists of two parts: a test tube and a filter-plunger. The design incorporates a prefilter and a membrane into the tip of the plunger. When the filter plunger is pressed through the liquid placed in the test tube positive pressure forces the filtrate up into the reservoir of the filter-plunger. UniPrep™ does not contain a septum in the cap and can be used to filter larger volumes (1 to 5mL). It is selected based on compatibility with the sample in use. In manual operation the filter-plunger after the tip comes in contact with the liquid is slowly pushed into the test tube until it stops at the bottom. It is emptied either by decanting into a sample or autosampler vial or by drawing the filtered sample into a syringe for manual injection into an instrument. Prefilter: Built-In Glass Fiber. Membrane: PTFE. Capacity Vol: 1 - 5mL. Retention: 0.45µm. 1000/Pack. Whatman™ #: UN513UORG.

Documents & Videos

The UniPrep™ syringeless filter is a preassembled filtration device for the filtration and storage of laboratory samples. It features a plunger filter and vial in one unit and replaces the syringe-coupled filtration devices with single disposable units. The UniPrep™ device consists of two parts: a test tube and a filter-plunger. The design incorporates a prefilter and a membrane into the tip of the plunger. When the filter plunger is pressed through the liquid placed in the test tube positive pressure forces the filtrate up into the reservoir of the filter-plunger. UniPrep™ does not contain a septum in the cap and can be used to filter larger volumes (1 to 5mL). It is selected based on compatibility with the sample in use. In manual operation the filter-plunger after the tip comes in contact with the liquid is slowly pushed into the test tube until it stops at the bottom. It is emptied either by decanting into a sample or autosampler vial or by drawing the filtered sample into a syringe for manual injection into an instrument. Prefilter: Built-In Glass Fiber. Membrane: PTFE. Capacity Vol: 1 - 5mL. Retention: 0.45µm. 1000/Pack. Whatman™ #: UN513UORG.

Ratings & Reviews

No reviews available

Be the first to Write a Review