The BriskHeat® TOTE™ wrap-around tote tank/intermediate bulk container (IBC) heater is designed for caged, plastic, or metal tote tanks. The wrap-around blanket design allows heating from the outside to avoid contamination from the inside. It features two separate heat zones (top and bottom) that allow adjustment of heater output when content levels decrease. Tote tank heaters feature an adjustable thermostat with a range of 50-160°F (10-71°C) and a built-in manual reset high-limit safety thermostat set at 195°F (91°C) for each heat zone. Attaches to the tank by using adjustable nylon straps with buckles (two across the top and three around the tank). Blanket is constructed of 1/4-Inch thick fiberglass insulation surrounded by silicone-impregnated cloth facing and liner with a 'mouse hole' designed for a spigot and a patented ground for safety that meets NEC 427.23. Optional insulated top cover available separately. Includes a 6-foot power cord with a standard 3-prong NEMA 5-15 power plug. Available in three different models with heights of 36-Inch, 42-Inch and 48-Inch.
The BriskHeat® TTH caged tote tank heater is ideal for both outdoor and indoor heating applications. By means of a silicone heater pad, this tote tank heater provides non-invasive heat that does not contaminate or scorch the product with a quick heat-up time due to direct surface contact underneath the plastic bladder. It includes an accurate outdoor-use digital temperature controller and an IBC silicone heating pad with easy-to-use plug-and-play connections. The multi-stranded heating element is uniformly placed to maximize heat distribution and is laminated between two extra-thick layers of 20mm fiberglass-reinforced silicone rubber. A Type-K thermocouple is built into the moisture and chemical resistant silicone rubber IBC heating pad located within a weight-absorbant 1/2-Inch thick foam pad. The tote tank heater also includes 6-foot silicone rubber power leads with an IP 67 four-pin (NEMA 6P equivalent) output receptacle and a 6-foot temperature control input power cord with a standard three-prong NEMA 5-15 power plug. The outdoor-use digital "ON"/"OFF" temperature controller mounts easily to the tote tank cage.