BriskHeat® BSAT101004 XtremeFLEX® BSAT Silicone Rubber Heat Tape with Time Percentage Dial Control, W x L: 1 x 48-Inch, 120V

The BriskHeat® XtremeFLEX® BSAT heat tape features a built-in compact time percentage dial control which eliminates the need to purchase a separate controller. The time percentage controller varies the proportion (length) of time the heater is in the 'on' or 'off' heating mode. The heating application will determine the actual percentage set-point required. The controller does not use a temperature sensor and therefore satisfactory operation requires occasional supervision under changing load conditions. Moisture and chemical resistant silicone rubber makes up the extruded outer sheath. It has a uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element and is suitable for electrically conductive surfaces. Maximum exposure temperature is 450°F (232°C). The power density is 6.0watts/sq in (0.009watts/sq mm). BSAT silicone rubber heat tape provides exceptional heater flexibility, durability and uniformity with a rapid heat-up and thermal response. It is ideal for a wide range of temporary heating applications and surfaces such as laboratory, valves, facilities maintenance and more. It includes a 6ft (2m) long power cord with a 120V standard 2-prong NEMA 1-15 plug. Material: Silicone Rubber. Maximum Exposure Temperature: 450°F (232°C). Power Density: 6watts/sq in (0.009watts/sq mm). Width: 1in (25mm). Length: 48in (1220mm). Total Watts: 288. Voltage: 120V. BriskHeat® #: BSAT101004.

The BriskHeat® XtremeFLEX® BSAT heat tape features a built-in compact time percentage dial control which eliminates the need to purchase a separate controller. The time percentage controller varies the proportion (length) of time the heater is in the 'on' or 'off' heating mode. The heating application will determine the actual percentage set-point required. The controller does not use a temperature sensor and therefore satisfactory operation requires occasional supervision under changing load conditions. Moisture and chemical resistant silicone rubber makes up the extruded outer sheath. It has a uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element and is suitable for electrically conductive surfaces. Maximum exposure temperature is 450°F (232°C). The power density is 6.0watts/sq in (0.009watts/sq mm). BSAT silicone rubber heat tape provides exceptional heater flexibility, durability and uniformity with a rapid heat-up and thermal response. It is ideal for a wide range of temporary heating applications and surfaces such as laboratory, valves, facilities maintenance and more. It includes a 6ft (2m) long power cord with a 120V standard 2-prong NEMA 1-15 plug. Material: Silicone Rubber. Maximum Exposure Temperature: 450°F (232°C). Power Density: 6watts/sq in (0.009watts/sq mm). Width: 1in (25mm). Length: 48in (1220mm). Total Watts: 288. Voltage: 120V. BriskHeat® #: BSAT101004.