Control Company 5050 | Traceable® Timer Switch Controller, 1/2-Inch High LCD Display, Timing Accuracy: 0.01%, Dimensions: 2-3/4 x 6 x 1-3/4-Inch

Traceable® timer switch controller can program up to 196 switchings per week. An always-remember memory permits programming 14 different switchings per day, which may be allocated over four separate weekly programs for up to 196 switchings per week. Easy to operate, schedule an entire week with the press of a few buttons. Turn equipment on today and off a week later. The controller will turn equipment on and off in intervals as short as 1 minute or as long as 168 hours. The day programs allow repeating the same cycle every day of the week, weekdays only, weekends only, or any selected day. Battery backup: A manual override permits equipment to be switched on or off without disturbing the program. Program and clock times are maintained for one year by two silver-oxide backup batteries in the event of an electrical outage. Brilliant, 1/2-inch high LCD display shows the time-of-day, day, and event number. LED light indicates the on/off status of attached equipment. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). CSA-and NTRL-C-rated, controls equipment to 125 VAC, 50/60 Hz, 15A, 1850w with a timing accuracy of 0.01%. High-impact ABS plastic case. Replacement battery Cat. No. 1039. Size: 2-3/4 x 6 x 1-3/4-Inch. LCD Display: 1/2-Inch High. Timing Accuracy: 0.01%. Minimum Switching Time: 1 M-Inch. Weight: 8-1/2oz. . Control Company #: 5050.

Traceable® timer switch controller can program up to 196 switchings per week. An always-remember memory permits programming 14 different switchings per day, which may be allocated over four separate weekly programs for up to 196 switchings per week. Easy to operate, schedule an entire week with the press of a few buttons. Turn equipment on today and off a week later. The controller will turn equipment on and off in intervals as short as 1 minute or as long as 168 hours. The day programs allow repeating the same cycle every day of the week, weekdays only, weekends only, or any selected day. Battery backup: A manual override permits equipment to be switched on or off without disturbing the program. Program and clock times are maintained for one year by two silver-oxide backup batteries in the event of an electrical outage. Brilliant, 1/2-inch high LCD display shows the time-of-day, day, and event number. LED light indicates the on/off status of attached equipment. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). CSA-and NTRL-C-rated, controls equipment to 125 VAC, 50/60 Hz, 15A, 1850w with a timing accuracy of 0.01%. High-impact ABS plastic case. Replacement battery Cat. No. 1039. Size: 2-3/4 x 6 x 1-3/4-Inch. LCD Display: 1/2-Inch High. Timing Accuracy: 0.01%. Minimum Switching Time: 1 M-Inch. Weight: 8-1/2oz. . Control Company #: 5050.