Oakton® WD-08491-14 Digi-Sense Pipe-Fitting Thermistor Probe for Closed Pipes or Vessels, Material: Stainless Steel, Dual Range: -40 to 150°C/-40 to 302°F, Cable Length: 3-Meter
Item Number:EW-08491-14
Manufacturer Part No:EW-08491-14
Manufacturer:Oakton Instruments (Antylia Scientific)
Details
- 1 inch probe tip with 316SS 1/8 inch NPT fitting, 10-ft detachable lead via BNC connector
- Pipe-fitting probe for closed pipes or vessels
- Probe and fitting are 316SS; autoclavable except lead
- Not electrically isolated
- Use with any meter that accepts Oakton Digi-Sense or YSI 400 Series probes
The Oakton thermistor probes offer excellent accuracy over the biological temperature range. Thermistor thermometry is based on the principle that metal oxides change resistance with a change in temperature. Our thermistors decrease in resistance as the temperature increases. The resistance change is detected by the meter where it is converted and displayed as a temperature reading. Probes are accurate to +/- 0.2°F from 32 to 150°F (+/- 0.1degC from 0 to 70degC). Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. Oakton #: WD-08491-14
Documents & Videos
The Oakton thermistor probes offer excellent accuracy over the biological temperature range. Thermistor thermometry is based on the principle that metal oxides change resistance with a change in temperature. Our thermistors decrease in resistance as the temperature increases. The resistance change is detected by the meter where it is converted and displayed as a temperature reading. Probes are accurate to +/- 0.2°F from 32 to 150°F (+/- 0.1degC from 0 to 70degC). Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. Oakton #: WD-08491-14