Thermo Scientific® F6020C-33 Thermolyne® Premium Large Muffle Furnace with (B1) Digital Single Setpoint Temperature Controller with Ramp & Dwell, Temperature Range: 100° to 1200°C, Capacity: 14-Liter/0.5-Cubic Foot, 240V, CE Certified

This Thermo Scientific® ELED Thermolyne Premium large muffle furnace has a capacity of 14L (0.5cu ft), requires 240V, and is for use with industrial applications. This furnace provides a spacious 14L(0.5cu ft) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis. Digital single setpoint control with ramp and dwell shows actual temperature or setpoint. Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity. Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit. Rear of the chamber incorporates a 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring devices. Optional stainless-steel shelf doubles load capacity (maximum temperature of 900°C). Door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. Includes cord and plug set. Shipping Weight: 134lbs. Temperature range: 100 to 1200°C (212 to 2192°F). Temperature stability: ±1.5°C at 1000°C. Temperature uniformity: ±4.5°C at 1000°C. Capacity: 14L (0.5cu ft). Interior Dimensions (D x W x H): 10 x 12.8 x 6.8in. Exterior Dimensions (L x W x H): 20.1 x 19.1 x 21in. Shelf: Stainless Steel. Control: Digital Single Setpoint with Ramp and Dwell (B1). Voltage Rating: 240V. Frequency: 50/60Hz. Current Rating: 18.3A. Power Rating: 4400W. Warranty: 12 Months. Certifications: CSA Approved and CE Marked. Thermo Scientific® ELED #: F6020C-33. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Thermolyne Premium large muffle furnace has a capacity of 14L (0.5cu ft), requires 240V, and is for use with industrial applications. This furnace provides a spacious 14L(0.5cu ft) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis. Digital single setpoint control with ramp and dwell shows actual temperature or setpoint. Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity. Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit. Rear of the chamber incorporates a 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring devices. Optional stainless-steel shelf doubles load capacity (maximum temperature of 900°C). Door safety switch stops power to heating elements when door opens. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. Includes cord and plug set. Shipping Weight: 134lbs. Temperature range: 100 to 1200°C (212 to 2192°F). Temperature stability: ±1.5°C at 1000°C. Temperature uniformity: ±4.5°C at 1000°C. Capacity: 14L (0.5cu ft). Interior Dimensions (D x W x H): 10 x 12.8 x 6.8in. Exterior Dimensions (L x W x H): 20.1 x 19.1 x 21in. Shelf: Stainless Steel. Control: Digital Single Setpoint with Ramp and Dwell (B1). Voltage Rating: 240V. Frequency: 50/60Hz. Current Rating: 18.3A. Power Rating: 4400W. Warranty: 12 Months. Certifications: CSA Approved and CE Marked. Thermo Scientific® ELED #: F6020C-33. Thermo Scientific ELED - “Every Lab, Every Day”.