Thermo Scientific® FD1545M Thermolyne® Industrial Benchtop Muffle Furnace with (C1) Digital Programmable Temperature Controller (1-Program & 8-Segments), Temperature Range: 100° to 1200°C, Capacity: 2.2-Liter/0.08-Cubic Foot, 120V

This Thermo Scientific® ELED Thermolyne industrial benchtop muffle furnace has a capacity of 2.2L (0.08cu ft), and requires 120V. Reaches a 1200°C maximum temperature. Heavy-duty firebrick insulation surrounds the opening for added durability. Features a digital programmable control with 1 program, 8 segments. Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes Holdback feature holds program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance. Adjustable alarm or overtemperature protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. Counter-weighted door swings upward, directing heat away from operator. Heavy-duty firebrick insulation surrounds chamber opening for added durability. Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber. Door safety switch protects operator by removing power to the heating elements upon opening the door. Rear-mounted 0.38in (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices. Includes oven, Platinel II thermocouple and a ceramic hearth plate to protect the bottom heating element. Requires fixed wiring and is not supplied with a power cord. Shipping Weight: 52lbs. Temperature: 100 to 1200°C. Capacity: 2.2L (0.08cu ft). Interior Dimensions (D x W x H): 9 x 4 x 3.75in. Exterior Dimensions (D x W x H): 18 x 11 x 16.5in. Control: Digital Programmable 1 Program/8 Segments. Voltage Rating: 120V. Frequency: 50/60Hz. Current Rating: 18.6A. Power Rating: 2230W. Warranty: 12 Months. Certifications: cUL, UL listed. Thermo Scientific® ELED #: FD1545M. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Thermolyne industrial benchtop muffle furnace has a capacity of 2.2L (0.08cu ft), and requires 120V. Reaches a 1200°C maximum temperature. Heavy-duty firebrick insulation surrounds the opening for added durability. Features a digital programmable control with 1 program, 8 segments. Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes Holdback feature holds program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance. Adjustable alarm or overtemperature protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. Counter-weighted door swings upward, directing heat away from operator. Heavy-duty firebrick insulation surrounds chamber opening for added durability. Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber. Door safety switch protects operator by removing power to the heating elements upon opening the door. Rear-mounted 0.38in (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices. Includes oven, Platinel II thermocouple and a ceramic hearth plate to protect the bottom heating element. Requires fixed wiring and is not supplied with a power cord. Shipping Weight: 52lbs. Temperature: 100 to 1200°C. Capacity: 2.2L (0.08cu ft). Interior Dimensions (D x W x H): 9 x 4 x 3.75in. Exterior Dimensions (D x W x H): 18 x 11 x 16.5in. Control: Digital Programmable 1 Program/8 Segments. Voltage Rating: 120V. Frequency: 50/60Hz. Current Rating: 18.6A. Power Rating: 2230W. Warranty: 12 Months. Certifications: cUL, UL listed. Thermo Scientific® ELED #: FD1545M. Thermo Scientific ELED - “Every Lab, Every Day”.