Thermo Scientific® HTF55347C Lindberg/Blue M® Digital Three-Zone Split-Hinge Tube Furnace with 24-Inch Heated Zone, Tube Diameter: 1 to 3-Inch, Temperature Range: 100° to 1200°C,Horizontal or Vertical Setup, 240V (Requires Independent CC58434C Controller)

This Thermo Scientific® ELED Lindberg/Blue M® split-hinge tube furnace requires 208/240Vand is configurable for horizontal or vertical use. Uses independent digital temperature control module (ordered separately). Featurs three independent power circuits (zones) with independent thermocouples for control references, and full adjustment of each zone over entire operating range to 1200°C. Center zone uniformity is achieved and operating length maximized through adjustable profiling of end zones by independent controller. Temperature uniformity is achieved with independent setpoint of end zones higher or lower than center. The patented Moldatherm LGO heating element modules offer superior radial and linear temperature uniformity and fast heatup and cooldown. Long-life, energy-efficient elements require little or no maintenance. Unique cabinet design achieves lower exterior surface temperature. Heat-reflecting element support assembly creates two highly effective insulating air spaces. Has a compact cabinet with high temperature-resistant painted finish. Accepts interchangeable Moldatherm tube adapters. Has long-life Platinel II thermocouple with 10ft. compensated lead wire and polarized plug. Requires independent digital temperature control module. Shipping Weight: 195lbs. Temperature Range: 100 to 1200°C. Display: LED. Frequency: 50/60Hz. Controller: Independent CC58434C. Heated Zone: 24in. Exterior Dimensions (L x W x H): 17 x 35 x 16in. Tube O.D: 1 to 3-Inch. Voltage Rating: 208/240V. Frequency: 50/60Hz. Warranty: 12 Months. Thermo Scientific® ELED #: HTF55347C. Thermo Scientific ELED - “Every Lab, Every Day”.

This Thermo Scientific® ELED Lindberg/Blue M® split-hinge tube furnace requires 208/240Vand is configurable for horizontal or vertical use. Uses independent digital temperature control module (ordered separately). Featurs three independent power circuits (zones) with independent thermocouples for control references, and full adjustment of each zone over entire operating range to 1200°C. Center zone uniformity is achieved and operating length maximized through adjustable profiling of end zones by independent controller. Temperature uniformity is achieved with independent setpoint of end zones higher or lower than center. The patented Moldatherm LGO heating element modules offer superior radial and linear temperature uniformity and fast heatup and cooldown. Long-life, energy-efficient elements require little or no maintenance. Unique cabinet design achieves lower exterior surface temperature. Heat-reflecting element support assembly creates two highly effective insulating air spaces. Has a compact cabinet with high temperature-resistant painted finish. Accepts interchangeable Moldatherm tube adapters. Has long-life Platinel II thermocouple with 10ft. compensated lead wire and polarized plug. Requires independent digital temperature control module. Shipping Weight: 195lbs. Temperature Range: 100 to 1200°C. Display: LED. Frequency: 50/60Hz. Controller: Independent CC58434C. Heated Zone: 24in. Exterior Dimensions (L x W x H): 17 x 35 x 16in. Tube O.D: 1 to 3-Inch. Voltage Rating: 208/240V. Frequency: 50/60Hz. Warranty: 12 Months. Thermo Scientific® ELED #: HTF55347C. Thermo Scientific ELED - “Every Lab, Every Day”.